Something for everyone in here

[sundog]

I have a collection of things I won't be using and need to sell so I can buy some more stuff to fill my parts box until I get tired of seeing them, etc...

All prices include shipping! in the U.S. (CONUS). Paypal only, please. Claim it here, PM me for my Paypal addy. I'll list 5 items at a time to match the descriptions to the pictures. Feel free to PM me a offer if you think something is priced too high.

1. Octura Flex Hex collet type connector for 5mm motor to .062 wire drive. New in package, with free 9” length .062 wire (with a piece of a propshaft you’ll want to cut off). $10 Sold to Meniscus
2. 6XL 2800KV unknown (Feigao?) brand brushless motor with water jacket. I bought this from a member a while back to try in a jet boat, and soon thereafter went to a Neu1515 1Y. Strong, has a little fore/aft shaft clearance, 5mm bullets (correction - these are 6mm bullets). $35 Sold to Dascoadams
3. Octura Flex Hex collet type connector 8mm motor to .187 (3/16) flex cable. New in package. Shipped to Meniscus by mistake - contact him if you need one!
4. Complete strudder system for medium size boats. 110mm tall water-pickup rudder, 4mm propshaft. Rudder can be configured to tip-up. Comes with 4mm Square end flex and stuffing tube. New, unused except that I cut off a piece of the Teflon liner for another project. Price reduced to $30
5. Two (2) 550 brushed motors with cooling coils from ABC jet ski's. 7.2-8.4v Used, strong. $10 Sold to Lenny

[sundog]

part two

6. Two (2) Airtronics MX-3FHSS 2.4ghz 3 channel tranmitters and 92324 receivers w/bind tools, manuals and boxes. 18 model memory, rock solid performers. Used, work like new. $80 each. Both are sold - ebay
7. Two (2) Airtronics 92324 2.4ghz receivers for use with MX-3FHSS Tx. Used, with boxes. $40 each Sold to Chop
8. Two (2) auto bailers that un-screw for cleaning. Used, work like new. These made me nervous, I ended up removing them and fixing the leaky boat. $10 for the pair. Sold to Boaterguy
9. Two U-joint couplers from Cornwall. Included are 2)6mm, 2)5mm, 1)4mm, 1) 3.2mm, 1) 3mm, 1) 2.3mm and 1) 2mm insert(s). New/unused. $20 takes all. Sold to Carnalito
10. Three (3) Cowl latches. These are the ‘push and ¼-turn’ type. New. $10 takes all Sold to Lenny

[sundog]

part 3

11. HPI Reverse Mixer. Turn your 2ch radio into 3 channels. Hold trigger forward (brake position) it will switch a servo to opposite position (like for reverse gear). Bought it to operate a reverse bucket on a 2ch ABC jet ski, but never got around to using it. New - tested with the Traxxas XL5 ESC listed below. $15
12. KB45-11XL 1000kv brushless motor. Used, has scratches on case and my poor grinding job on shaft flat. Runs smooth. $20
13. Small Bolt Hydro stock 30A brushless ESC. Used, waterproofed. $10 No longer available
14. Tenshock Hydro (minicat) stock 30A brushless ESC. Naked, used. Had to cut the shrink wrap off to remove from the hull. $10 Sold to Alexgar
15. Traxxas XL5 waterproof ESC. New, tested w/Deans affixed. Look up specs online. $30

[sundog]

last group -pt. 4

16. Turnigy 30A brushed ESC. Lightly used in an ABC jet ski before swapping it to B/L. Still has ABC’s connectors & Deans on it (plug and play). $10
17. Turnigy 2835 (380S) 2700kv brushless inrunner w/3.2mm shaft. New, unused. Includes connectors. $10 Sold to by TomM
18. Turnigy Typhoon 2218H 450 size heli outrunner 2-4S 3450kv, 3.17mm shaft. Came with a boat deal, looks new. $10 Sold to Killer
19. Venom 4mm x 7mm strut bearings, new in package. 1) flanged, 1)regular. $8 for the pair
20. Walkera 20A brushed ESC. Used briefly on a Walkera 60 Heli before changing to B/L. $8

[steveo]

i have a airtronics mx-3fhss-2 2.4 sport will the #7 reciever bind with it

[Chop]

I would like dibs on the:
"7. Two (2) Airtronics 92324 2.4ghz receivers for use with MX-3FHSS Tx. Used, with boxes. $40 each"

I need to check when I get home tonight to make sure they are the ones I need.

steveo beat me to it, I want second in line for them (after I check).

[sundog]

i have a airtronics mx-3fhss-2 2.4 sport will the #7 reciever bind with it

No, yours uses the 92524 receiver. The 92324 receivers only work in the original MX-3FHSS system as far as I know. Sorry!

[Alexgar]

I'll take # 14 tenshock esc

[steveo]

then there all yours chop

[Alexgar]

pp sent and addy pm'd

[lenny]

I will take the 550 motors.
And may be more stuff.

[Chop]

Okay, s'dawg I can use the Airtronics receivers.

If you can do $75 shipped for both I'll take 'em.

[killer501872000]

turnigy outrunner 2218h

pm sent

[killer501872000]

turnigy outrunner 2218h

dave i will take the outrunner, send paypal info

[sundog]

Chop, since I'm paying the shipping and Paypal fees, I think I'll hold off for what I'm asking for them. No worries