Hi Guys,
I have an extra ProBoat Stiletto OPC that I don't need. I have two others... need to clear up some room in the garage.
This boat was used for about 4-minutes to do a quick test, and it otherwise new. I did some trueing work to the bottom, and removed the platform where the ESC would normally sit to allow a taller battery pack to slide all the way to the back of the tray. Ride pads were block sanded, any voids filled, then a thin layer of epoxy applied, then sanded again, then primed and painted.
The boat is in perfect condition and is ready to throw cells in and go run. Complete with the factory MR3000 RX. Comes in the original box and shipping box, and the original instructions are also included, unopened.
$250.00 shipped in the USA
Let me know if you have any questions.
I have an extra ProBoat Stiletto OPC that I don't need. I have two others... need to clear up some room in the garage.
This boat was used for about 4-minutes to do a quick test, and it otherwise new. I did some trueing work to the bottom, and removed the platform where the ESC would normally sit to allow a taller battery pack to slide all the way to the back of the tray. Ride pads were block sanded, any voids filled, then a thin layer of epoxy applied, then sanded again, then primed and painted.
The boat is in perfect condition and is ready to throw cells in and go run. Complete with the factory MR3000 RX. Comes in the original box and shipping box, and the original instructions are also included, unopened.
$250.00 shipped in the USA
Let me know if you have any questions.
Comment