FS: VS-1 FE Custom, Kneeler Hydro, (5)-Airtronics FHSS-2 receivers, 7.5 Hyper Lower

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cybercrxt
    Fast Electric Addict!
    • Mar 2009
    • 2909

    #1

    FS: VS-1 FE Custom, Kneeler Hydro, (5)-Airtronics FHSS-2 receivers, 7.5 Hyper Lower

    Well, I need to get some stuff out of the garage, so here goes.

    1) VS-1 Tunnel hull, converted to FE, MAJOR mods made to the ride surface. You can see the secondary ride pad was added, ride pad overhang was removed, sponson tips rounded majorly, and 3.5 Dumas cowling was added to reduce weight and overhang. This is probably the best running VS-1's you will find because of the added work done to the hull. It had an OS lower unit used, and it already has the metal plate in the transom so its a bolt in operation. Painted with Dupont Chromabase and Chromaclear. Very nice hull, too bad my wife just didn't seem to enjoy it, so it must go. $165 shipped. SOLD TO KEN

    2) 35" 1/4 Scale Kneel down hydroplane. This was one of the last I built. They run good in a straight line but can be finicky with agressive turns. This uses and outboard motor and looks awesome running down the pond. Asking $85 shipped. Sold to Brushless55

    3) (5)- Airtronics 2.4ghz FHSS-2 92624 4 channel receivers. If you have a FHSS-2 version of the Airtronics radio, here is an absolute deal for you as these receivers are now discontinued, and were around $80 each new. All 5 have been fully tested, and work fine. I have boxes for 4 of the 5. I will take $210 shipped for 5 of them, or $50 each due to having to ship all separately. I can also work deals for 2 or more. ALL 5 SOLD TO TRISTAN.

    4) Hyperformance 7.5 outboard lower unit and 7.5 FE motor conversion kit. The top of the cavitation plate has carbon plate added for strength. I will take $55 shipped for the setup. These are $60 for the lower, and $40 for the motor conversion new, so grab a steal! SOLD TO KClements

    Pics:



    Last edited by cybercrxt; 04-21-2011, 07:14 AM.
    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM
  • cybercrxt
    Fast Electric Addict!
    • Mar 2009
    • 2909

    #2


    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

    Comment

    • cybercrxt
      Fast Electric Addict!
      • Mar 2009
      • 2909

      #3
      Last edited by cybercrxt; 04-19-2011, 01:09 PM.
      Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

      Comment

      • cybercrxt
        Fast Electric Addict!
        • Mar 2009
        • 2909

        #4

        Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

        Comment

        • th3umbra
          Member
          • Dec 2010
          • 39

          #5
          I need the receivers. Sending a pm...

          Comment

          • cybercrxt
            Fast Electric Addict!
            • Mar 2009
            • 2909

            #6
            Recievers on hold with th3umbra till wednesday. Thanks, Mike
            Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

            Comment

            • natenkw
              Fast Electric Adict!
              • Jul 2010
              • 171

              #7
              What leg did you run on the hydroplane?
              Light travels faster than sound. This is why some people appear bright until you hear them speak.

              Comment

              • cybercrxt
                Fast Electric Addict!
                • Mar 2009
                • 2909

                #8
                Hey, If I remember right it was a hi jack mount with rek lower.withe the hi jack, you can mount an rek, lawless or k&b lower, so there are a lot of choices. Mike
                Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

                Comment

                • natenkw
                  Fast Electric Adict!
                  • Jul 2010
                  • 171

                  #9
                  Cool. I have an rek with nothing to put it on. I am trying to get the woodstuff that jpracing1997 has in the swap shop, but if that doesn't happen and nobody else gets it I would like to have it. Thanks.
                  Nate
                  Light travels faster than sound. This is why some people appear bright until you hear them speak.

                  Comment

                  • cybercrxt
                    Fast Electric Addict!
                    • Mar 2009
                    • 2909

                    #10
                    Nate, just let me know. Mike
                    Last edited by cybercrxt; 04-19-2011, 07:07 AM.
                    Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

                    Comment

                    • Brushless55
                      Creator
                      • Oct 2008
                      • 9488

                      #11
                      hey Mike, what power and lower did you have on the kneeler?
                      thanks
                      .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                      Comment

                      • jpracing1997
                        Senior Member
                        • Mar 2008
                        • 535

                        #12
                        If my boat is not a woodstuff made by Mike it was sold to me wrong from here in the swap shop. From what I can tell it is. I've done alot of research on this boat as well. Anyway it goes it handles very well.

                        Comment

                        • cybercrxt
                          Fast Electric Addict!
                          • Mar 2009
                          • 2909

                          #13
                          Brushless, it had a medusa 36-50-2000kv. It doesn't take much to push it. I explained the lower unit choices above! Mike
                          Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

                          Comment

                          • Brushless55
                            Creator
                            • Oct 2008
                            • 9488

                            #14
                            Originally posted by cybercrxt
                            Brushless, it had a medusa 36-50-2000kv. It doesn't take much to push it. I explained the lower unit choices above! Mike
                            not sure if I follow that one Mike?
                            and would a turn fin help this one in the corners?
                            thanks again
                            .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                            Comment

                            • cybercrxt
                              Fast Electric Addict!
                              • Mar 2009
                              • 2909

                              #15
                              Originally posted by cybercrxt
                              Hey, If I remember right it was a hi jack mount with rek lower.withe the hi jack, you can mount an rek, lawless or k&b lower, so there are a lot of choices. Mike

                              That was what I was talking about Brushless. It has mounts for a ul1 turn fin, tho I always liked running it without one. It would kinda slide as you turned, haha. Mike
                              Laser cut, birch plywood rc race boat kits- WWW.MLBOATWORKSRC.COM WWW.DINOGYLIPOS.COM

                              Comment

                              Working...