Cap bank over run

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • m4a1usr
    Fast Electric Addict
    • Nov 2009
    • 2038

    #1

    Cap bank over run

    Got some leftovers from builds I am doing for RRR and OSE members who want smaller Capacitor Banks. The commercial ones tend to be bigger in size and values. Mine are designed for smaller hulls or where space is very limited. All are built from Rubycon ZLH caps. Clear heat shrinked and each cap has been glued to each other. Wire is very flexable 18ga silicone. Up for grabs are the ones in the photo.

    2-4000mfd 50v banks (4-1000mfd caps)
    1-3000mfd 50v bank (3-1000mfd caps)
    2-2000mfd 50v banks (2-1000mfd caps)
    1-1410mfd 50v bank (3-470mfd caps)

    All are brand new. Been tested to charge up (22 volts) and multi metered to ensure no shorts. LOT HAS BEEN SOLD Paypal as gift or add 3%I will include some very sticky Velcro so you can attach these to your favorite location. BTW these have 3" leads with the exception of one of the 4000mfd banks. That one has 4.5" leads.

    John

    Last edited by m4a1usr; 04-17-2011, 12:24 PM.
    Change is the one Constant
  • LiPo Power
    DJI Drone Advanced Pilot
    • May 2009
    • 3186

    #2
    Way to go....
    Wicked products....
    DJI Drone Advanced Pilot
    Canada

    Comment

    • morewattsnow
      Senior Member
      • Oct 2010
      • 192

      #3
      John- I'll take them- send Paypal address- Mike
      Fast Electrics Have A Small Carbon Wake

      Comment

      • Brushless55
        Creator
        • Oct 2008
        • 9488

        #4
        are you going to make more of them?
        thanks
        .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

        Comment

        • m4a1usr
          Fast Electric Addict
          • Nov 2009
          • 2038

          #5
          Originally posted by Brushless55
          are you going to make more of them?
          thanks

          Sure will. I need to get some of the silicone wire ordered up but I have everything else. Have any particular config you want? I use the 3-1000mfd banks for my CC240lv and the 2-1000mfd for my CC120lv. Course there is no rule as to what to put with what.

          John
          Change is the one Constant

          Comment

          • morewattsnow
            Senior Member
            • Oct 2010
            • 192

            #6
            caps

            Money sent- thanks
            Fast Electrics Have A Small Carbon Wake

            Comment

            • Brushless55
              Creator
              • Oct 2008
              • 9488

              #7
              Originally posted by m4a1usr
              Sure will. I need to get some of the silicone wire ordered up but I have everything else. Have any particular config you want? I use the 3-1000mfd banks for my CC240lv and the 2-1000mfd for my CC120lv. Course there is no rule as to what to put with what.

              John
              well I want to beef up my T180 and also my BlackJack esc
              .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

              Comment

              • Karfrik
                Fast Electric Addict!
                • Jun 2009
                • 1177

                #8
                Originally posted by m4a1usr
                Sure will. I need to get some of the silicone wire ordered up but I have everything else. Have any particular config you want? I use the 3-1000mfd banks for my CC240lv and the 2-1000mfd for my CC120lv. Course there is no rule as to what to put with what.

                John
                Hi John,been trying to contact you for some weeks now about a set of caps you offered to do for me but no replies back.Mine is for a 200a suppo esc.LMK if you can still build one for me.This was weeks ago,hope you remember me!!.......thanks,..Albert

                Comment

                • m4a1usr
                  Fast Electric Addict
                  • Nov 2009
                  • 2038

                  #9
                  Originally posted by Karfrik
                  Hi John,been trying to contact you for some weeks now about a set of caps you offered to do for me but no replies back.Mine is for a 200a suppo esc.LMK if you can still build one for me.This was weeks ago,hope you remember me!!.......thanks,..Albert
                  Gottcha covered Al. PM me so I can get your address.

                  John
                  Change is the one Constant

                  Comment

                  Working...