Tweet
ALL SOLD!
-
Last edited by Basstronics; 04-29-2011, 06:47 AM.42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP) -
Bass
Are thay still up for sale/ MY mini long lite has .098 but I think my motor is 3mm not pos' and the one I have I drilled and she just dosen't set right,Can that mess with my power? -
Well if your motor is 3mm these wont work for you. You will need to measure your shaft.42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)Comment
-
You would have to use a dial/digital caliper or a micrometer to accurately measure the shaft. A scale wont do.
Micrometer:
Dial Calipers:
42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)Comment
-
Chud not sure which kv motor yours is but looks like hk has same shaft for all the motors that look like yours.
It says:
Shaft Size: ?³2.3mm?~10mmOSE GIFTING ELF
HAPPY HOLIDAYS!!Comment
-
Despite what might be claimed you still want to measure it. My 2040 motor claims to have a 2.3mm shaft but it is clearly 2.2mm. I had numerous people telling me 2.3 when I put plans for my couplers up. If the couplers were made to 2.3 and the shaft is actually 2.2 then there is excess slop thats no good.
A Caliper reading should be sufficient.42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)Comment
-
Thank's for looking out guy's. Going to drive to East R/C today to get the measurment, I better get on the ball and buy a meter,
Comment
-
Hey chud you can swing buy tonight when i get off and we can measure it!!!!Comment
-
Yes, get a set of calipers.
Local Harbor Freight store or their online store.
Or try these:
Ive had good luck with them.42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)Comment
-
Got it bass it's 2.28mm pick one up at the advance today,$31.oo well worth it!Sorry for the delay
Comment
-
With those you need to make sure the plastic rough portion remains clean and oil free. 0 it out good, make sure the jaws are clean.
Use the back part of the caliper jaws (where its flat) to check. I usually "pinch" the ID part on the end to apply appropriate pressure.
Let me know if its still the same dimension or if you come up different.42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)Comment
-
With pressure 2.25 /without 2.28 I tryed to fix the other today with no luck If I get one from H/K two more week's,wish to find some one in the state's so I can hit the water this weekend ,Comment
-
Well were about .05mm difference here- thats .002". I know my couplers have a little clearance in them. Im not sure if there is .002" though.
I will dig out my small hole gauges and see if I have one that goes small enough. Maybe it will work out. Maybe with a few minutes and a rat tail file Im sure it will fit.42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)Comment
Comment