Hydro & Marine Micro Kat tunnel RTR

[Boatman]

Trade in progress
Hull:
Length: 365 mm or 14.4 in
Width: 216 mm or 8.5 in
Flood chamber installed
Self-rights in 12 seconds
100% water tight
Carbon fiber on the floor, transom, and flood chamber wall.
Cost = $118 + shipping from Germany
Condition = Used

Motor:
2848SL 3900kv Brushless Inrunner (WaterCooled)
Kv: 3900rpm/v
Diameter: 31mm
Length: 60mm
Shaft diameter: 3.17mm
Weight: 153g
Cost = $37.95 + shipping from Hong Kong
Condition = used


ESC:
Castle Creations Barracuda-80A
Continuous 80 amps
Resistance = 0.001 ohms
Brake = Programmable
Reversible Yes - change any two wires
Low Voltage Cut-off = Programmable
Size = 1.05 x 2.65 x 0.45"
Weight (w/wires) = 2.1 oz (60g)
Waterproof
Cost = No longer available. Avg price $50- $80
Condition = (lightly used)

Batteries: (2) 3S turnigy 2200 (1) 3S zippy 2200
lightly used with connectors

Servo:
Futaba S3115 Micro Precision Servo
Torque: 39 oz-in (2.8 kg-cm)
Speed: 0.15 sec/60°
Dimensions: 1.1 x 0.5 x 1.2" (1-1/8" x 1/2 x 1-3/16")(28 x 13 x 30mm)
Weight: 0.60oz (5/8oz) (17g)
Lead Length: 6.5" (165mm)
Cost = $19.95 + shipping
Condition = used

Motor mount:
Etti adjustable motor mount
19mm motor mounting holes
Fits 380 to 480 sized Motors
Cost = $19.99 + shipping
Condition = used

Strut bracket:
Octura Long Bracket
Cost = $12.95 + shipping
condition: used

Strut:
Fullers 1/8 strut
Cost = $19.95 + shipping
Condition = used

Rudder:
Rudder for Formula Fastech by Pro Boat
95mm long
25mm wide
Water pick-up
Cost = $18.99 + shipping
Condition = used

Outboard:
AquaCraft Outboard Upper Cover EP1
Length: 2-3/4" (70mm)
Width: 1-3/4" (45mm)
Height: 2-3/4" (70mm)
Cost = $6.29 + shipping
Condition = (used)

Drive line:
Octura .098 flex cable with 1/8" prop shaft
Cost = $19.99 + shipping
Condition = used

Coupler:
Octura Coupler Flex Hex
1/8" to .098 Cable
Cost = $9.95 + shipping
Condition = used

Boat stand:
Custom PVC stand (needs to be glued together)

Prop:plastic molded. not sure about size but worked well.


Radio system:AM 2CH


Information:
This boat is a "mock" outboard. The motor is mounted in the hull, but the outboard will turn with the rudder.
Decals are NOT cleared over, so they can be removed.
There is a small crack on the flood chamber opening that is strictly cosmetic.

Reason for selling:
this was for my son but he likes his traxxas slash more...

Price: 125.00 plus 15.00 shipping to the states. paypal fees included.

[Boatman]

couple more pics

[koontek]

How fast would you say this boat does? Also do you have any videos of it running?

[Boatman]

I don't have any vids. I would say top speed would be about 40mph setup the way it is. Quick out of the hole as well. A bit much for my son so I adjusted the throttle curv. His WOT was maybe 15mph. He just didn't get why it wouldnt steer with no throttle... luckily he never hit anything but he just likes the truck.

[62 bugzilla]

thanks

I'm glad we could work out a deal and I'm sure you'll be happy. Shawn