36" Woodstuff Tunnel Re-list

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gizmo1
    Senior Member
    • Dec 2010
    • 254

    #1

    36" Woodstuff Tunnel Re-list

    <<<<< SOLD Thanks Ted >>>>>


    I am relisting this up for sale, i had this sold but in typical RCU fashion the buyer was a flake, imagine that....

    Here is what the boat will come with, these are all Brand New parts, never seen water.
    The Hull is used but not a mark on it.

    36" Woodstuff Tunnel with Mahogany inlays, this boat was Mike L's boat, i bought the hull from him in December and he was kind enough to give me the set up he ran on the boat so you know it flys and is set up.

    Castle -Neu 1518 1Y 1800kv motor with Neutronics 8mm bullets
    HRC Cooling Jacket
    HyperFormance Racing 7.5 lower Polished
    HyperFormance Racing Motor Conversion Kit
    HyperFormance Racing Propshaft assy 3/16"
    M445 B/S/P prop
    HyperFormance Racing 3/16" Flex Shaft
    K&B mount plate
    Aeromarine 2nd water pickup
    Hobbico CS-170 Titanium Gear 333oz digital servo
    4-40 steel steering rods, carbon fiber re-inforced

    This is a Gorgeous Boat, and when Mike ran the boat SAW he did reach over 73mph.


    I am asking $ 685.00 obo shipped to lower 48
    Not willing to part the boat out yet.
    Paypal No Fees





    Last edited by gizmo1; 03-28-2011, 05:32 PM.
    JAE21 Rigger, ML Boatworks PS 295 Tunnel , TS3 FE Tunnel , H & M No Step 3 Mono , H & M Skater , Wildcat EP , Rio EP .
  • JMSCARD
    Fast Electric Addict!
    • Mar 2010
    • 3444

    #2
    Buddy that sure is pretty.... this is the one I wanted originally.... all that work and you didn't even run it????

    My 32" ran phenominal... yours is even better!!

    well I just want to give a big shout out and say thanks again buddy for your phenominal service and work on my HPI 5bss you built me from the ground up... I have had great service before, but honestly the level of service I recieved from you is flat out the best yet, I really, really appreciate you taking the time to bring me step by step through the build...

    I am interested in this boat BTW.... I just need to see what I can sell to make it happen...lol...

    Comment

    • gizmo1
      Senior Member
      • Dec 2010
      • 254

      #3
      I received a request for pics of the inside so here you go.
      I threw in a couple of the motor and polished lower as well.

      ***** NOTE *****

      The CC Hydra 240 esc, Futaba R603fs receiver, and the Reedy Receiver pack is Not included for $685.00. I am open to selling them with boat at a fair price. Just make me a fair offer.


      Here are the pics, if you guys need anymore just drop me a line, thanks











      JAE21 Rigger, ML Boatworks PS 295 Tunnel , TS3 FE Tunnel , H & M No Step 3 Mono , H & M Skater , Wildcat EP , Rio EP .

      Comment

      • teddyboy
        Senior Member
        • Jan 2010
        • 518

        #4
        Hydro

        Is the boat still available? Looks like Jason may have purchased it, if not, What is necessary for the boat to run? What battery setup was used?
        Ted H. Wachter
        West Florida Model Boat Club
        East Texas RC Boaters

        Comment

        • gizmo1
          Senior Member
          • Dec 2010
          • 254

          #5
          Originally posted by teddyboy
          Is the boat still available? Looks like Jason may have purchased it, if not, What is necessary for the boat to run? What battery setup was used?
          Ted,

          The boat is still for sale.

          The needed items would be Radio Transmittor, Radio Receiver, Receiver battery pack, and an ESC.
          Now with that said he boat can be purchased as it sits ,ARTR, it has a New Castle Creations Hydra 240 ESC w/Neutronics 8mm Bullets, New Reedy 1600mah receiver pack, and a Futaba R603FS Receiver in it, these can be purchased with the boat at a Fair Offer.

          The boat is set up to run 4S2P 5000mah, or higher, and a min. 35C , or 5S2P 5000mah, or higher, and a min. 35C battery set up.
          Just depends on how fast you want this beast to run.

          I am open to any and all offers in any configuration, i would however like to sell it as hull and lower unit complete as a bare bones minimum.
          I realize some of you guys may have motors,esc's,radio gear , and a servo, laying around.
          Just make me a Fair offer , you may be surprised.

          If you would like to talk to me in person just drop me a pm and i will give you my cell #.

          Thank You For Your Interest,
          Buddy
          JAE21 Rigger, ML Boatworks PS 295 Tunnel , TS3 FE Tunnel , H & M No Step 3 Mono , H & M Skater , Wildcat EP , Rio EP .

          Comment

          • gizmo1
            Senior Member
            • Dec 2010
            • 254

            #6
            This Boat Is Sold

            Thanks Ted
            JAE21 Rigger, ML Boatworks PS 295 Tunnel , TS3 FE Tunnel , H & M No Step 3 Mono , H & M Skater , Wildcat EP , Rio EP .

            Comment

            Working...