F/S: HOR Twin

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Diesel6401
    Memento Vivere
    • Oct 2009
    • 4203

    #1

    F/S: HOR Twin

    SOLD


    Item: HOR 32" cat artr or bnd
    Condition: Used
    Price/Shipping: BND: $365 shipped, ARTR: $325 shipped lower 48

    Ok guys, really don't want to let it go, but need $$$. I bought it used as a hull/hardware from here. Ran it once on CF40s and got 53.1mph, currently I have CF45's on it and should get close to 60mph with it. The motor mounts have been re-fitted to accept 25mm bolt pattern. The struts have been modded with 3/16 aeromarine bushings and everything has been re-epoxyed. The esc's are wired in parallel and the I ran it with (2) 3s 6000mah 25-50c nano-techs for 6s. Comes with the following.

    Hull: HOR Apparation 32" with Carbon/kevlar reinforcment ($150}
    Motors: (2) Suppo 3126 1600kv outrunners, re-badged as Turnigy. {$20 each}
    Esc's: Seaking 80HV with 5.5mm bullets, re-badged as Turnigy Marine. {$70 each)
    Props: CF40 C/R & CF45 C/R {$20}
    Drive shaft: .150 3/16 (PB Miss Geico C/R )
    Couplers: Octura 5mm .150 {$10 each}
    Drive dogs: Octura 3/16 {$3 each}
    Bushing: Aeromarine .187 {$5}
    RX: MR200 {$50}

    Total BND: $430

    * I do not want to part this out!
    Attached Files
    Last edited by Diesel6401; 03-22-2011, 02:05 PM.
    - Diesel's Youtube
    - Diesel's Fleet
    "It is easier to be wise for others than for ourselves"
  • tunnelvision
    Senior Member
    • May 2010
    • 685

    #2
    Diesel, I'll take it if its still available.

    Thanks,
    Rob
    Go Fast...Turn Right...

    Comment

    • Diesel6401
      Memento Vivere
      • Oct 2009
      • 4203

      #3
      Originally posted by tunnelvision
      Diesel, I'll take it if its still available.

      Thanks,
      Rob
      Still available. You want artr or bnd?
      - Diesel's Youtube
      - Diesel's Fleet
      "It is easier to be wise for others than for ourselves"

      Comment

      • tunnelvision
        Senior Member
        • May 2010
        • 685

        #4
        Cool, I'll take it BND. Thanks! Paypal is ready, just send me your address.
        Go Fast...Turn Right...

        Comment

        • Diesel6401
          Memento Vivere
          • Oct 2009
          • 4203

          #5
          Originally posted by tunnelvision
          Cool, I'll take it BND. Thanks! Paypal is ready, just send me your address.
          sending pm.
          - Diesel's Youtube
          - Diesel's Fleet
          "It is easier to be wise for others than for ourselves"

          Comment

          • Diesel6401
            Memento Vivere
            • Oct 2009
            • 4203

            #6
            Here's a link to the batts I used and they worked great. http://www.hobbyking.com/hobbyking/s...dProduct=11939

            Or any 3s 5000mah 30c or higher would work as well. Just FYI...
            - Diesel's Youtube
            - Diesel's Fleet
            "It is easier to be wise for others than for ourselves"

            Comment

            • bigpapa
              Fast Electric Addict!
              • Apr 2009
              • 2330

              #7
              diesel any other goodies u partin with
              THUNDER TIGER OUTLAW,THUNDER TIGER BANDIT
              CARBON FIBER MINICAT HYDRO,MINICAT HYDRO,PROBOAT MISS GEICO,SKUNKWORKS 32" CAT TWIN, H@M VIPER TURBINE ---JEFF WOHLT WIRE DRIVES

              Comment

              • Diesel6401
                Memento Vivere
                • Oct 2009
                • 4203

                #8
                Originally posted by bigpapa
                diesel any other goodies u partin with
                Only other one I would even think of parting with would maybe be my Stiletto I have been secretly working on , I haven't even run yet. It's about 85% - 90% complete. Has a seaking 120 and a CC 1512 1800kv. Haven't decided what I want to do with it yet though. Bought it used & gutted it, did some mods to work the motor in, cut the motor shaft down to fit the outboard modded the outboard cover to fit the cc motor. Boat looks cool with that 1512 hanging off the end. Should run very well I hope lol... Other then that I got nothing.
                - Diesel's Youtube
                - Diesel's Fleet
                "It is easier to be wise for others than for ourselves"

                Comment

                Working...