Tweet
SOLD!!! Out of stock HK ss 125 amp esc never used. The previous owner removed the shrink wrap to unclog cooling block. Used tape to re-apply. Below is some specs from HK.really needing something around the 90amp range so I'll either trade for one or $40 shipped priority mail. Thanks
Spec.
Weight: 107g
Size: 90x41x18mm
Cells: 2-7S Li Po
Continuous Current: 125A
Burst : 150A
Bec: No BEC (Opto)
Reverse: Yes
User Programming options.
Cell type / Voltage cutoff
Throttle (Auto / 1.1ms to 1.8ms / Hard / Soft )
Brake (No Brake / Soft / Medium / Hard)
Motor Direction (Clockwise / Counter-clockwise)
Timing Mode Setting (1 / 7 / 15 / 30)
PWM setting: 8K/16K
Reverse: No reverse / 25% power / 50% Power
Note:
This ESC is OPTO, with no BEC supplying power to your receiver. You will need an extra power source for your receiver. (such as UBEC or Rx battery pack)
Spec.
Weight: 107g
Size: 90x41x18mm
Cells: 2-7S Li Po
Continuous Current: 125A
Burst : 150A
Bec: No BEC (Opto)
Reverse: Yes
User Programming options.
Cell type / Voltage cutoff
Throttle (Auto / 1.1ms to 1.8ms / Hard / Soft )
Brake (No Brake / Soft / Medium / Hard)
Motor Direction (Clockwise / Counter-clockwise)
Timing Mode Setting (1 / 7 / 15 / 30)
PWM setting: 8K/16K
Reverse: No reverse / 25% power / 50% Power
Note:
This ESC is OPTO, with no BEC supplying power to your receiver. You will need an extra power source for your receiver. (such as UBEC or Rx battery pack)
Comment