Cleaning the Shop: Motors, ESC, Bullets

[Meniscus]

I'm cleaning the shop. Here are a few things for sale. Buyer pays actual shipping via their preferred method with or without insurance.

3 sets of 6.5mm Castle bullet connectors (unopened): $12 for all 3 SOLD

2 sets of 4mm Castle bullet connectors (unopened): $7 for both SOLD

Ammo 28mm motor - less than 1 minute total use, 2600kv as I remember: $30, now $25 shipped to lower 48!

Mile High RC - Outrunner 400f: $20, now $15 shipped to lower 48!

Orion Cobalt Double 9 Turn - original owner, less than 1 minute use: $25, now $20 SOLD

Orion Revolution - unknown total use, low turns but unsure how many. It flew with my B44 buggy: $15, now $10 SOLD

LRP Quantum Competition 2 - 150A waterproof brushed ESC, small size will fit anywhere, has Deans and on/off switch, runs great! $85, now $80 SOLD

IMG00106-20110306-1718.jpg IMG00107-20110306-1719.jpg IMG00108-20110306-1721.jpg
IMG00112-20110306-1722.jpg IMG00114-20110306-1725.jpg

[egneg]

Ben I will take the 4mm bullets.

[Meniscus]

You got it Chuck.

[k10smith]

3packs of 6.5mm

I will take the 6.5 bullets
send pp info

[Meniscus]

Prices reduced, please see original post.

[Jesse J]

Ben,
interested in the LRP speedy - Is this for brushless? If so, wanna trade for a BJ motor and $$? or maybe a pair of BJs?

[Meniscus]

No sorry, it is only for brushed. You couldn't ask for a better brushed controller.

[Jesse J]

I am not doubting that. do you have a motor that would work well in a 1/10th scale rally? (along the lines of 4500-5000 kv)
and are you interested in the BJ motors? and/or other trade items?

[Meniscus]

I have the two brushed Orion motors that would work well with the LRP. If you're looking for brushless, check you PM.

[Jesse J]

pm replied. Wanna trade?
my offer: 2 BJ motors w/cooling cans + $30 cash for LRP esc and two motors

[Meniscus]

Prices reduced, includes shipping to lower 48!

[Meniscus]

OK, this is all that's left. I'd like to see these go to good homes.

Ammo 28mm motor - less than 1 minute total use, 2600kv as I remember: now $25 shipped to lower 48!

Mile High RC - Outrunner 400f: now $15 shipped to lower 48!

[lenny]

Would that ammo be good for rio ep brushless setup ?
And is it 28mm or 36mm OD ?

Thanks.

[Meniscus]

Would that ammo be good for rio ep brushless setup ?
And is it 28mm or 36mm OD ?

Thanks.

This ammo motor should have enough power for a model that size. It all depends on what speeds you want to achieve and what other components you are considering running. Are you buying new components or using some you already have?

I'm not a mono guy and have never run a Rio, but for example, this motor can handle up to 4s and on 4s1p turning an X632 prop, you would see low-40s setup well. However, if you have cavitation or is not setup properly, you could see high motor temps. If you're only going to run sport, then it should be fine. If you're going to be running race water with lots of loading or skipping through the turns, then I think a 36mm motor would be more applicable. I would recommend running an ESC that would handle 80A constant with that setup and stick to full throttle with limited half throttle usage.

As stated in the description, it is a 28mm motor.

[Meniscus]

Last chance! If you want either of the remaining motors, let me know!