Need to unload some stuff FAST... Take a look

[kcpasco]

Just reduced prices lets get them gone :-))Hey Guys have a few items I need to unload quickly so hopefully I have some things you guys want. I am just putting a few boats on right now, I will be listing a bunch of motors and other parts here very soon.

Thriftway 12th scale Brushless Vintage Hydroplane ARTR.... 275.00 Shipped
Just add Radio Gear and Batteries and Go
Turn Fin
Brushless Motor 2075kv
125 Amp ESC
Mount Mount water cooled
Stuffing Tube
Teflon Tube
Strut
Rudder
Water Tubing
Wood Battery Tray
Wood Servo Mount
Push Rod Seal
Cable Collet

Red Vintage Hydroplane 12th scale ARTR.... 225.00 Shipped (SOLD)
Turn Fin
Brushless Motor 2075kv
Mount Mount water cooled
Stuffing Tube
Teflon Tube
Strut
Rudder
Water Tubing
Wood Battery Tray
Wood Servo Mount
Push Rod Seal
Cable Collet

White Vintage Hydroplane 12th Scale ARTR.... 180.00 Shipped
Turn Fin
Brushless Motor 2075kv
Mount Mount water cooled
Stuffing Tube
Teflon Tube
Strut
Water Tubing
Wood Battery Tray
Wood Servo Mount
Push Rod Seal
Cable Collet

Nitro .25 V-Hull Pursuit Fast! Powerful ARTR 32 inch....299.00 Shipped (SOLD)
Length: 32" (excludes rudder and strut)
Beam: 9"
Engine: Taiwan made .25 class water cooled pull-start nitro engine with engine mount
Exhaust: water cooled aluminum power pipe with pressure feed (installed)
Drive system: stainless steel collet, 3/16" flexi cable, brass tube, teflon lining, teflon washer, propeller, prop nut, drive dog, aluminum stinger drive (installed)
Prop: 43mm dia bronze prop
Rudder: 130mm aluminum (installed)
Turn Funs: aluminum (installed)
Trim Tab: aluminum with stainless steel plate (installed)
Other accessories: antenna mount, water tubings, cowl lock, ventilation mesh (installed)
Radio Box: water proof wooden radio box and servo mounting plated (installed)
Fuel Tank: 220cc (installed)

Parts not included: Batteries and chargers, radio system (servo, transmitter, receiver), boat stand


200 Amp Monster High Voltage ESC Waterproof Watercooled... 175.00 Shipped (SOLD)
Only used twice to test a setup this speed control has a waterproof box built around it and has water cooling tubes installed.

CURRENT(continuous) 200A
BEC N/A
LI-PO 4-10 cells
NI-CD/NI-MH 8-30 cells
SIZE(mm) 130*60*40
WEIGHT 450g
PWM 8KHz
PROGRAMMED-BY PROG-CARD

[Rumdog]

We need pics, bro.

[kcpasco]

Here are a couple pictures of all the items....
The white shovelnose I didnt include a picture its the same as the red just white gel coat instead of red.

Ask any questions you guys may have. Thanks

[kcpasco]

Hey sorry I was in the process of adding them. If you need to see anything else let me know. Thanks again guys for looking

We need pics, bro.

[dasboata]

sorry to do this but you might want to see this http://forums.offshoreelectrics.com/...ad.php?t=22077

[kcpasco]

Ha no need to apologize that one was not waterproofed or watercooled. Also probably ran more than 2 times which is all this one has on it is two runs... But Ill lower the price on it to 175.00 Shipped. Which is 40$ less than I paid for it without the watercooling and waterproofing.

sorry to do this but you might want to see this http://forums.offshoreelectrics.com/...ad.php?t=22077

[Basstronics]

KCPASCO

Just a friendly heads up- to sell stuff here you have to post pictures. Best advice I can give you is if you "really" want to sell stuff you will need ample pictures showing the details of what you are selling.

Just saying the boat has a 2075KV motor doesnt tell us much... It could be 2040 or it could be 4074? Just like saying it has a "prop".

These comments are not made to be negative- just helpful.

[kcpasco]

Again thank you for the feedback, I have tons of pictures of everything I have listed if you are interested in the item just ask what you would like to see... Or just ask the question and I will be more than happy to answer for you. Thanks

KCPASCO

Just a friendly heads up- to sell stuff here you have to post pictures. Best advice I can give you is if you "really" want to sell stuff you will need ample pictures showing the details of what you are selling.

Just saying the boat has a 2075KV motor doesnt tell us much... It could be 2040 or it could be 4074? Just like saying it has a "prop".

These comments are not made to be negative- just helpful.

[kcpasco]

Here is a picture of the inside of the shovelnose Hydros... Make sure you read bellow each item to see what comes with it. But this does show the motor and speed control. Motor is some off brand, comes in many boats, and the speed control is called a suppo 125amp or something like that.

[JimClark]

we need to see pictures of the actual items you are selling or the thread will be deleted

[kcpasco]

Thats fine I will remember that for future picture posts. Every picture I have posted so far on this thread is the actual item for sale so no worries on your end

we need to see pictures of the actual items you are selling or the thread will be deleted

[Rumdog]

Are you a retailer?

[kcpasco]

I use to have a store yes but have been closed down for quite some time... Was just a hobby and have moved on. Just getting rid of some things now.

Are you a retailer?

[kcpasco]

Anyone interested in any of these or have any questions don't hesitate thanks guys

[madgadget]

What props are on the red and white vintage hydros???