Small Lipo, servo, and charger lot (good 2s rx packs or small airplane)

[keithbradley]

I have some servos (smaller than standard size), 2s lipo packs, and 2s lipo chargers I got from a friend. At one time he was selling airplanes and other RCs on the net but quit and gave what he had left to me. I've decided to sell this stuff and send some profits his way.

There are a total of (8) servos, and (9) lipos. (5) lipos are 2s 850mah, and (4) are 2s 900mah. The servos go for $16 on the net and lipos this size are around $15. At those prices there is over $250 here not counting the chargers. I dont expect to get anywhere near that, but make me an offer on the lot. I would be willling to sell this stuff for about 25% of what they cost retail, the following prices if you would like to buy individual items:

Servos: $16 shipped for 2
Lipos: $20 shipped for 3

[keithbradley]

I forgot to add to the first post:

These smaller 2s lipos can be used as rx pack with the use of a voltage regulator or HV servos. Standard servos are usually rated at 6v, so a fully charged lipo is a little much for them without a regulator.

[PDR447]

dimensions on the lipos? checked the voltage/balance on them at all? charger included? thinking of them as a receiver pack. any links handy to said voltage regulators?(feeling too lazy atm to google)

[Brushless55]

I have two of those red lipos for my little cars
I think I paid $15 for two so $20 for 3 is decent
and I think those servos are $10 each at tower so again good deal for 2 shipped

[keithbradley]

I have two of those red lipos for my little cars
I think I paid $15 for two so $20 for 3 is decent

If anyone wants all of them they get a LOT cheaper too

[Brushless55]

SERVO SPECS: Length: 27mm (1.06")
Width: 12.7mm (.50")
Height: 22.45mm (.88")
Weight: 13g (.46oz)
Speed: .12 sec/60°
Torque: 22 oz-in

[Brushless55]

If anyone wants all of them they get a LOT cheaper too

hmmmmm

[keithbradley]

dimensions on the lipos? checked the voltage/balance on them at all? charger included? thinking of them as a receiver pack. any links handy to said voltage regulators?(feeling too lazy atm to google)

Yes, all have voltage at 7.4v or slightly higher.

Heres a regulator I found with the google machine. There are tons of options out there though:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=380305063130&hlp=false&rvr_id=213802833247&crlp=1_263602_304652&UA=WXI7&GUID=6551587912e0a47a44a24db2fe1cf80f&itemid=380305063130&ff4=263602_304652

[Dale Koblitz]

Wonder what the c rating is on those lipo's? They look like they'd fit in my brushless mini-t. Can they put out 25 amps without puffing up though?

[keithbradley]

Wonder what the c rating is on those lipo's? They look like they'd fit in my brushless mini-t. Can they put out 25 amps without puffing up though?

That I dont know. The yellow ones say "made in Korea", which is where Enerland cells are made, who are known for having quality cells. That really doesn't mean much though, to be honest. These were intended to be used in airplanes, so I would think they would need to discharge well, but I can't say first hand. Sorry I dont have more info.

To the person that asked about size (sorry I missed it the first time):
I measured the yellow ones and they are roughly 1-1/4" x 2" x 3/8". The red ones are slightly larger, but not much. Maybe an 1/8" to 3/16" on some measurements.

And yes, you can have chargers with the batteries if you need them. Honestly if the batteries all sell and I have chargers, they are probably going to get tossed. Im trying to clean up all the extra stuff floating around here that isnt being used.

[HYDROJERRY]

im not a internet gooroo but i have a losi micro desert truck coming and if these lipos would fit( i dont no) i would buy the 3 for 20.00 deal????

[keithbradley]

im not a internet gooroo but i have a losi micro desert truck coming and if these lipos would fit( i dont no) i would buy the 3 for 20.00 deal????

I googled "losi micro desert truck" and checked them out. They come with a 150mah battery stock, so my guess would be that these are too large. The stock batteries are nihms, so you never know, but thats a big difference (150mah to 850mah). The micros are pretty small, so I think these would probably be too big to fit without mods. If it were a mini instead of a micro (1/18 not 1/36), that would be a different story.

[Dale Koblitz]

Definately to big for a micro

[keithbradley]

Somebody make me an offer on this stuff...I wont be offended. Let me know what this stuff is worth to you and lets work something out...

[HYDROJERRY]

thanks for looking and finding the info for me sorry i cant use them good luck with your sale..