(4) Turnigy 6s/400mah lipos

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • keithbradley
    Fast Electric Addict!
    • Jul 2010
    • 3663

    #1

    (4) Turnigy 6s/400mah lipos

    For sale I have 4 turnigy 6s/4000mah 20/30C lipos. I have 4 of these but 2 of them have been used in an offroad car with velcro attached to the bottom, and the velcro held the shrink wrap, but not the cells, so there is no shrink wrap on either one. I wrapped tape around them and called it good, if you were to use them in a boat you would want to re-shrink wrap them. One of the two that broke through the shrink wrap knicked the spur gear when they came out, so there is a spot on that one where the spur rubbed the edge of the cells, but it seems to still work fine.

    Here is what I propose, since two of these are "below par":

    I will sell these for $80 shipped for the shrink wrapped pair, and include the other two free. This means if you buy them you will get all four for $80, but please dont ask for the free ones if you arent buying the others.
    These are used and sold as is. I just ran 66mph in my 1/7 scale car with one about 30 minutes ago, but I recently bought all new lipos and wont be needing these.


    Last edited by keithbradley; 02-20-2011, 01:00 AM. Reason: Mark "sold"
    www.keithbradleyboats.com
  • JackBlack26
    Senior Member
    • May 2007
    • 905

    #2
    Awesome deal! Wish I had use for them.

    Comment

    • Brushless55
      Creator
      • Oct 2008
      • 9488

      #3
      keith, do you have a picture of all for in the deal?
      thanks
      .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

      Comment

      • keithbradley
        Fast Electric Addict!
        • Jul 2010
        • 3663

        #4
        Here's # 3. Its not bloated or anything...it almost looks like that in the pic. If you look closely though you can see the skin that they put around the cells is still on it and its kind of loose on the edges without the shrink wrap to hold it tight. I just put electrical tape on both ends to hold it on for now. I will wrap some kind of tape around all of it before shipping though just so the cells arent exposed.
        #4 lipo is at work (which is where I ship everything from), and I dont have any pics of it. I took one of my cars in there to do some mods to it and that lipo was in the car so its sitting on my toolbox right now. Its just like this one, except its totally wrapped in tape. Its the one that hit the spur gear so I immediately wrapped that one.

        www.keithbradleyboats.com

        Comment

        • johnnyoverkill
          Senior Member
          • May 2008
          • 285

          #5
          Keith,

          I'll take the 4 6S packs. Send me your PP addy when you have a moment please.

          Thanks,
          John
          "When too much is just right!"

          Comment

          • keithbradley
            Fast Electric Addict!
            • Jul 2010
            • 3663

            #6
            Originally posted by johnnyoverkill
            Keith,

            I'll take the 4 6S packs. Send me your PP addy when you have a moment please.

            Thanks,
            John
            Pm sent. Sold pending payment.
            www.keithbradleyboats.com

            Comment

            • johnnyoverkill
              Senior Member
              • May 2008
              • 285

              #7
              Payment sent Keith.

              Thanks again,
              John

              "When too much is just right!"

              Comment

              • Brushless55
                Creator
                • Oct 2008
                • 9488

                #8
                looks like it could be cool just to use clear heat shrink on them
                .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                Comment

                • johnnyoverkill
                  Senior Member
                  • May 2008
                  • 285

                  #9
                  The batteries landed safe and sound today Keith.

                  Thank you for the deal!
                  John

                  "When too much is just right!"

                  Comment

                  Working...