Tweet
Here i have 5, 0.150 shafts, 2 of which have loctite 3/16th stub shafts onto them. Lengths are over 12inch long
1x length of 0.150 cable that is just under 24inch
2x lengths of 0.150 teflon liners not cut, but its has been bent in some areas as its been sitting in tool box for 12months.
3 ABC props all S/B my me.
2140/3
2137/3
H10
Worked well on 8XL 4s stuff. Would be more suited to riggers but im not running small riggers anymore. Would also be fine with other motors.
3x 5mm - 0.150 flex hex.
Long version. One of the has a missing grub screw. I just cannot find it in tool box. I have not used the other 2 with both grub screws in them.
I would like $70 Australian + shipping (10bucks to US) for all this stuff.
US $ to AUD $ is 1 for 1 at the moment so that conversion is easy to work out.
Paypal only buyer pays palpal fees.
reply on here not PMs cause i dont check them often enough.
At this stage i dont really want to seperate.
Dave
1x length of 0.150 cable that is just under 24inch
2x lengths of 0.150 teflon liners not cut, but its has been bent in some areas as its been sitting in tool box for 12months.
3 ABC props all S/B my me.
2140/3
2137/3
H10
Worked well on 8XL 4s stuff. Would be more suited to riggers but im not running small riggers anymore. Would also be fine with other motors.
3x 5mm - 0.150 flex hex.
Long version. One of the has a missing grub screw. I just cannot find it in tool box. I have not used the other 2 with both grub screws in them.
I would like $70 Australian + shipping (10bucks to US) for all this stuff.
US $ to AUD $ is 1 for 1 at the moment so that conversion is easy to work out.
Paypal only buyer pays palpal fees.
reply on here not PMs cause i dont check them often enough.
At this stage i dont really want to seperate.
Dave
: 
Comment