FS: Octura M445 Brand New

[djmaincheese]

Bought this two days ago to run on my Spartan but I am sticking with the
Prather 225 I have on there now. If anything I need a bigger prop like the 230

Brand Spankin New Octura M445 LH 3/16 Beryllium Copper
Sharpened, Polished & Balanced.

$35 Shipped







Thanks for looking
Dean

[Alexgar]

im thinking for my df29 cc1515, what do you think?

[djmaincheese]

I honestly have no idea, I have actually just gotten into RC Boating so this whole Prop thing is new to me. I just know its smaller than the one Im running now and if anything I would be upgrading to a slightly bigger prop.
Im sure if you look around the Prop Thread Section someone will definitely be able to say yes or no for your application. It's 45mm X 63mm if that helps you at all :)
Thanks
D

[Jesse J]

im thinking for my df29 cc1515, what do you think?

Awesome prop - perfect match. If you don't have one in your prop box... here is your chance.

[rearwheelin]

If its sharp i will take it.....

[djmaincheese]

Hey rearwheelin, it's almost razor sharp. My paypal is [email protected]
I can get it shipped out today for you.
Thanks
Dean

[rearwheelin]

445m

Hey rearwheelin, it's almost razor sharp. My paypal is [email protected]
I can get it shipped out today for you.
Thanks Thank you Dean i am going to PP right now.
Dean

[djmaincheese]

SOLD to rearwheelin
Mods, please delete. Thanks

[keithbradley]

Bought this two days ago to run on my Spartan but I am sticking with the
Prather 225 I have on there now. If anything I need a bigger prop like the 230

Brand Spankin New Octura M445 LH 3/16 Beryllium Copper
Sharpened, Polished & Balanced.

$35 Shipped

Dean

An s225 is a big jump from the stock prop on the spartan. I assume youre running aftermarket electronics?

[djmaincheese]

Yes, running a Leopard 3674 1300KV and Sea King 120A ESC. She boogies now :)

[keithbradley]

Yes, running a Leopard 3674 1300KV and Sea King 120A ESC. She boogies now :)

Nice! I bet it runs well.
Keep a close watch on temps when running that large of prop. That is a big prop to run on a 120A esc, especially if youre already maxing the esc voltage. I think a s230 would definitely be pushing it.
I have the same motor going into a 32" cat Im putting together as a sport boat. Great value motor!!!

[djmaincheese]

Hey Keith Should I go up to the 180A ESC?
Right now she runs great but I have no idea about speed, maybe high 40's

[keithbradley]

Hey Keith Should I go up to the 180A ESC?
Right now she runs great but I have no idea about speed, maybe high 40's

It wouldnt hurt, but you could just monitor it closely the way it is. I know the spartan is plastic, so melting the hull is a danger in the unfortunate event of esc failure. You may want to consider that regards what esc you use. Something like a metal (or even wood) pad under the esc would give you peice of mind knowing that if something happens its not going to melt a hole through your boat.

If you are running the s225 now, and it is staying cool, you're probably ok. Any bigger prop is getting too big for that motor to turn anyway, not to mention your handling will start to fade away with the larger props. I would be curious how a s220 would do with that setup. Sometimes propping down can get you speed too by not loading the motor so hard and allowing it to turn faster.

[ron1950]

just bought one from steve s/b/p but payed a little more darn it lol

[rearwheelin]

Recieved prop

Well i think it was burried in a pile of mail so i just now had a chance to look at it..... Very good job ! This member wouldn't hesitate to buy another from you ! Very good work.