Tweet
Here is a project I just finished. Cant run it cause everything is frozen (20 Below) so I figure I'll put it up here. The hull is a complete Carbon Fiber layup. It is 28" in length with a beam of 10.5". The hull is solid. There is a bulkhead up in the bow for more rigidity. Everything is new. Nothing has seen water. I did bench test the electronics to make sure everything worked before I listed it. Everything checks out A-OK. Buyer will need to supply their own ESC. The buyer will need to fine tune the setup since I cant out here. Also wouldnt hurt to put a coat or two of clear on the hull. I will list everything that is included and put the prices I paid for the items minus the shipping cost I paid. There will be some items I dont list, for example.....water tubing, pushrod. clevise, dd, prop nut etc. I'm not asking to be paid for my time building it or paint. so we will take it from there with a comprehensive price breakdown and then I will throw my asking price out there. Please keep in mind everything is new. OK, here is the breakdown.......
Kintec 3/16 Adjustable stinger w/tube and bushing.....$36.00
Kintec 5 1/4" Rudder & mount.....$27.00
Kintec 68mm Turn fins.....$16.00
Etti Motor mount.....$18.00
Speedmaster 1 1/2"x1 1/2" Trim tabs.....$16.00
EXI D226F Servo 180 oz of torque @ 6V.....$15.00
Castle Creation 1518 1Y 1800KV motor.....$100.00
OSE 1518 Waterjacket.....$21.00
2 OSE water outlets.....$5.00
Octura 5mm-.187 coupler.....$10.00
Octura X640 B/S Prop.....$25.00
Hughey 3/16-.187 Flex cable.....$24.00
Carbon Fiber hull.....$150.00
-----------------------------------------------------------
Total Cost...........................$463.00
Ok, now that's out of the way, I need to come up with an asking price. My asking price will be shipped in the Continental US. All others will have to pay actual shipping charges.......
HULL & HARDWARE.....$250 Shipped Conus
CC 1518 1Y & OSE Waterjacket.....$125 Shipped Conus
HULL & HARDWARE w/MOTOR & JACKET $350.00 Shipped Conus
I will only sell motor and jacket once hull w/hardware is sold
Buyer to pay PP fees or send as XXXX
Now for the pics.......................................
Kintec 3/16 Adjustable stinger w/tube and bushing.....$36.00
Kintec 5 1/4" Rudder & mount.....$27.00
Kintec 68mm Turn fins.....$16.00
Etti Motor mount.....$18.00
Speedmaster 1 1/2"x1 1/2" Trim tabs.....$16.00
EXI D226F Servo 180 oz of torque @ 6V.....$15.00
Castle Creation 1518 1Y 1800KV motor.....$100.00
OSE 1518 Waterjacket.....$21.00
2 OSE water outlets.....$5.00
Octura 5mm-.187 coupler.....$10.00
Octura X640 B/S Prop.....$25.00
Hughey 3/16-.187 Flex cable.....$24.00
Carbon Fiber hull.....$150.00
-----------------------------------------------------------
Total Cost...........................$463.00
Ok, now that's out of the way, I need to come up with an asking price. My asking price will be shipped in the Continental US. All others will have to pay actual shipping charges.......
HULL & HARDWARE.....$250 Shipped Conus
CC 1518 1Y & OSE Waterjacket.....$125 Shipped Conus
HULL & HARDWARE w/MOTOR & JACKET $350.00 Shipped Conus
I will only sell motor and jacket once hull w/hardware is sold
Buyer to pay PP fees or send as XXXX
Now for the pics.......................................
? WHAT RULES?
Comment