Carbon Fiber motor mounts FOR SALE

[rearwheelin]

I am making adjustible motor mounts for monos and some designs can be used in hydros. They are Carbon Fiber and solid square aluminum bar drilled and taped. I make these using only simple tools one at a time. These are desgned to fit 1500 series all the way up to a 1527 long and have 25mm spaced holes drilled 4mm( can do what ever spacing or hole size as needed). They are light and super strong and can fit up to a 50 mm can. They are 3'' wide and 5.5-6'' long. There is no limit to customizing. Making a taller motor plate to bolt up a esc mount in the pic holding the mount. These mounts are guarenteed strong . I can work them to fit all most anything , guarenteed or money back...........$ 70.00 shipped..In my next post is my simple mount that is $50.00..

[rearwheelin]

Simple adjustable mount........

Just finished puting this mount together for a friend. I highly recomend this one ,its much easier for me to make and seems increadable strong ! I think a boat will be totaled before this mount slips adjustment ! I will use a simple mount in my Rico.......Also this mount has better up and down adjustment than my other one, iether mount will allow you to drop the motor deep in the V.

[properchopper]

Gorgeous. I'll PM my address !

[jdstang]

Have you tried them in any hydro's yet?

[bigpapa]

Man thats some awsome work congrats on a job well done ...................

[rearwheelin]

Have you tried them in any hydro's yet?

No not yet, they should work well though ! I havn't made a hydro specific motor plate yet but no problem, it will be a snap to make ! I still have to try turning and fliping the aliminum square binding bars, there are offset evenly drilled holes that might raise the mounting plate ware the hydro needs to be. I will try it and let you know.....

[bigpapa]

think so also great looking mounts

[rearwheelin]

Thank you for the comments ! Goal for this mount, strong, light,simple and good looking

[bigpapa]

awsome think its all that and then some

[rearwheelin]

Hydro Mount !

Have you tried them in any hydro's yet?

Here is the hydro mount , all I did was flip Motor plate over. I will drill some more holes so the plate can be lowered more, as it is its really close. I will leave this mount alone as it is going in a mono and is spoken for.

[bigpapa]

kool deal looks great ................

[RIPFENCE]

nice man..is there any way to make these for rail style mounting?

[rearwheelin]

Gorgeous. I'll PM my address !

I made some great templates out from your mount , hopefully it works out for ya and you wont need rails ! I will send it to you tomarro, folds up good for shipping. Make sure when your puting it together you keep the washers rounded edge facing the CF , when they press them at the manufacturing plant they leave the washer with a edge that will scratch the CF....Particularly the end that adjusts. Talk to you later

[rearwheelin]

Gorgeous. I'll PM my address !

nice man..is there any way to make these for rail style mounting?

Sure , you mean the motor plate between the rails without the side plates or with side plates that bolt to the rails. Im sure i could make a wider mounting plate .............I can hook it up , just let me know what you need and will make it !

[rearwheelin]

nice man..is there any way to make these for rail style mounting?

Sure , you mean the motor plate between the rails without the side plates or with side plates that bolt to the rails. Im sure i could make a wider mounting plate .............I can hook it up , just let me know what you need and will make it !

By order of special request here is a CF rail mount. Looks like a winner ! Now I need somebody who wants to buy one ! ......PS misspelled mount in picture, didn't want to do picture over.......