Another shelf of stuff collecting dust. I got into these to play on
Dad's small pond... but found that I just am not into it enough (and need the $$).
Here they are (prices shipped Cont us-international pays extra):
$70: Mini V hull and hardware - upgraded to flex shaft with b/s Octura prop and futaba micro servo.
Hull is perfect, hatch has some sun fading, but is solid.
Comes with new Proboat motor/ESC/rx (no crystal) and servo (comes with a ch3 TX).
Here I was running 3S and burned up the old motor... $50 w/o Proboat combo motor/esc/rx/servo.
$70: Mini Rio hull and hardware - upgraded servo and motor mount - I was running brushless in this and it SCREAMED (video) and was nice and stable.
Upgraded flex and rudder also and b/s Octura prop. brushed motor and brushed ESC (water cooled and water proofed by me).
Hull has minor imperfections/repairs, but is water tight. $50 w/o motor/esc.
$75: Mini cat hull and hardware - I scratch built this and ran it a couple times - looks very cool on the water (vid).
Needs a hatch (I can make one if it will make the sale) they are easy to make out of construction foam and epoxy.
It has a brushless ESC 35A tucked up inside the hatch - the motor is not worthy and will need to be replaced.
this one could be run with a brushed motor/esc if desired.
Here is build link
Take the whole lot for discounted price. $175 shipped for all you see here. All minis will have 1/8" to .098" flex couplers and propellers shown. Open to reasonable offers.
items required beyond this sale to have 3 racing minis:
All need 2 cell lipo
MiniCat: 1 small bl motor, make a hatch, paint job, Tx/rx
MiniV: install included motor/esc/servo, Ch 3 crystal for rx
Mini Rio: install included motor/esc, add tx/rx
Dad's small pond... but found that I just am not into it enough (and need the $$).
Here they are (prices shipped Cont us-international pays extra):
$70: Mini V hull and hardware - upgraded to flex shaft with b/s Octura prop and futaba micro servo.
Hull is perfect, hatch has some sun fading, but is solid.
Comes with new Proboat motor/ESC/rx (no crystal) and servo (comes with a ch3 TX).
Here I was running 3S and burned up the old motor... $50 w/o Proboat combo motor/esc/rx/servo.
$70: Mini Rio hull and hardware - upgraded servo and motor mount - I was running brushless in this and it SCREAMED (video) and was nice and stable.
Upgraded flex and rudder also and b/s Octura prop. brushed motor and brushed ESC (water cooled and water proofed by me).
Hull has minor imperfections/repairs, but is water tight. $50 w/o motor/esc.
$75: Mini cat hull and hardware - I scratch built this and ran it a couple times - looks very cool on the water (vid).
Needs a hatch (I can make one if it will make the sale) they are easy to make out of construction foam and epoxy.
It has a brushless ESC 35A tucked up inside the hatch - the motor is not worthy and will need to be replaced.
this one could be run with a brushed motor/esc if desired.
Here is build link
Take the whole lot for discounted price. $175 shipped for all you see here. All minis will have 1/8" to .098" flex couplers and propellers shown. Open to reasonable offers.
items required beyond this sale to have 3 racing minis:
All need 2 cell lipo
MiniCat: 1 small bl motor, make a hatch, paint job, Tx/rx
MiniV: install included motor/esc/servo, Ch 3 crystal for rx
Mini Rio: install included motor/esc, add tx/rx
Comment