Extreme Modded Out Baja 5b

[gizmo1]

Ok Guys i hate to do this but i am moving on to another project and this will fund it.

I have worked on this for over a year and there are very few stock parts left on the car. i will do my best to remember everything.

The car has quite a few 1 off custom pieces, it is Stupid Fast and handles incredible.

It will come with Custom Painted Snap On 5b Body, the Custom Painted Rat Rod Body, with the Scale Hemi Engine.

On to list of parts.

CY DS/Sikk Marine Conversion motor
ADA Billet Intake w/teflon gaskets
Walbro 668 carb
TGN Redneck filter
CPI Big Bore Pipe
Craftwerks Red Plug Wire
DDM Chrome Kit,Fan Cover,and Cut to Fit head cover
Python Bio-Hazard Billet Pullstart Housing
Killer RC Kill Switch w/ LED Light and Buzzer
SS Alloy Diff w/ TFE 5000 diff oil
TFE Bearings
Extra bearing installed on layshaft
TGI 2-Speed Transmission
HH 57 spur and Turtle 16t 1st gears
HH 55 spur and Turtle 19t 2nd gear
HH Red Boots
Turtle Racing Clutch set up Billet w/TFE Bearings
Wes Brown Custom Carbon Fiber Rear Plate
Wes Brown Custom Carbon Fiber Front Plate
Wes Brown Custom Carbon Fiber Rear Chassis Plate
Wes Brown Custom Carbon Fiber Front Droop Plate
Wes Brown Custom Carbon Fiber Tank /Chassis Support
Wes Brown Custom Carbon Fiber Side Chassis Mounts
Wes Brown Custom Carbon Fiber Front Hinge Pin Brace
Wes Brown Custom Carbon Fiber 8mm Front Shock Tower
Wes Brown Custom Carbon Fiber 8mm Rear Shock Tower special made to run front shocks on the rears
GH Billet Front Shock Tower Braces
SS Front Shocks w/stock springs
SS Front Shocks for the Rears w/ DDM HD Chrome Springs
RC Skins Shock Covers Red all around
FLM Billet Front Shock Mount Covers
RPM Front Upper and Lower Control Arms Red
RPM Rear Upper and Lower Control Arms Red
RPM Rear Bumper
Scorpion Unlimited Shorty Chassis Kit
SUH Front Hub Adapters
SUH Rear Hub Adapters
BRP 3" Front Slicks
BRP 3 1/2 " Rear Slicks
IRP Red powdercoated Turnbuckles
IRP Stand-Off Spacer Kit for Turnbuckles
IRP Front Steel Racing Rod ends For Upper Control Arms
IRP Rear Steel Racing Rod Ends For Upper Control Ams
ADA Red Billet Rear Hub Kit w/TFE Bearings
IRP Quick Fuel System
Racers Edge Servicable in-line fuel filter
Red Fuel Lines

Well I think thats about it, car will come with Servos and Receiver Pack, but no TX/RX.

Now on to the Pics

With Rat Rod Body, these were taken b4 i installed the CPI Pipe




















These are Pics of the car in it's current setup
























More pics available upon request.


I am asking $ 1300.00 , shipped to lower 48, as you can see i have much,much more than that in it.
The car will come with the manual.

Thanks For Looking,
Giz.

[99z286spd]

Hello ....I am an HPI Baja fanatic .....I love your car .... but recouping from the holidays so I can't afford right now. You may have better luck selling your baja on HPIBAJAFORUM.COM .... I am a member there as well and there's lots of people that would like your ride..... Im afraid all these boat guys might pass on your item. I tried to sell a gas Enforcer boat here and no one even replied.

[gizmo1]

Hello ....I am an HPI Baja fanatic .....I love your car .... but recouping from the holidays so I can't afford right now. You may have better luck selling your baja on HPIBAJAFORUM.COM .... I am a member there as well and there's lots of people that would like your ride..... Im afraid all these boat guys might pass on your item. I tried to sell a gas Enforcer boat here and no one even replied.

Hi,
Yeah been a member over there for quite awhile..it is listed over there as well...
in case you didin't put it together, i am the owner of IRP, Inertia Racing Products...My stuff is at Distributors all over the world, my biggest is DDM...
i also sell direct off my site www.inertiaracingproductsrc.com

being a fellow fanatic you know what i have in that 5b..lol that $ 1300.00 is a give-away price....

later man,
Giz.

[99z286spd]

being a fellow fanatic you know what i have in that 5b..lol that $ 1300.00 is a give-away price....

later man,
Giz.[/QUOTE]
Yes and I am Sooooo drooling right now .... ya gotta get it out there if ya gotta sell it. Good luck with sale.....wish I had the cash! That thing is sweet!

[Brushless55]

awesome ride!
and I love the slicks

[old guy]

Hi what is the cc of the motor?? and about what Hp is it?
Old Guy

[JMSCARD]

Hi what is the cc of the motor?? and about what Hp is it?
Old Guy

believe it to be 29cc and from what I've been told 5hp :)

[old guy]

one more thing do you have off road tires and rims for it to?

[monojeff]

Hi,
Yeah been a member over there for quite awhile..it is listed over there as well...
in case you didin't put it together, i am the owner of IRP, Inertia Racing Products...My stuff is at Distributors all over the world, my biggest is DDM...
i also sell direct off my site www.inertiaracingproductsrc.com

being a fellow fanatic you know what i have in that 5b..lol that $ 1300.00 is a give-away price....

later man,
Giz.

Just to let you know I am starting to do complete wraps for the bajas at the moment I am working on a woodster wide body wrap.
I will be selling on the hpi forum soon, if you ever need anything window nets, lights, grills etc. let me know.

Crazy looking CAR!
I like it!!
VERY GOOD BUY HERE ANYONE WHO IS INTERESTED!!!

[JMSCARD]

one more thing do you have off road tires and rims for it to?

Old guy its not my thread listing.... lol.... I talked to him earlier though about it thats why I responded to the motor size and hp for him.....lol.... but also its a "Street" baja with a shortened Chassis specially built for the street... he doesn't have the Offroad Tires/Rims for but he has the hubs... but from talking to him I dont think I'd offroad it as its specifically designed for Oval track racing.... JFYI... take care my friend and thanks for your help in the other thread... just tagging ya back :)

[Brushless55]

Just to let you know I am starting to do complete wraps for the bajas at the moment I am working on a woodster wide body wrap.
I will be selling on the hpi forum soon, if you ever need anything window nets, lights, grills etc. let me know.

Crazy looking CAR!
I like it!!
VERY GOOD BUY HERE ANYONE WHO IS INTERESTED!!!

Good to know Jeff!
I will call soon about my PT SS45

[monojeff]

Good to know Jeff!
I will call soon about my PT SS45

Sounds good whenever your ready.

I will be sure to post some pics of the 5T when I am done.

[Brushless55]

Sounds good whenever your ready.

I will be sure to post some pics of the 5T when I am done.

are you doing them for the buggy?

[monojeff]

are you doing them for the buggy?

I can do them for the buggy but I will have to make the template for them.
Would be easier if I had the body in hand but I think I can do it without it as well with some back & forth on some measurements.

[gizmo1]

Hi what is the cc of the motor?? and about what Hp is it?
Old Guy

OG,
the motor is a 26cc motor, in its stock form it is right at 5 hp and 2.0 lb/ft of torque.
The nice thing about this DS/SIKK set up is rebuild cost. the Headkit,cylinder,piston,ring,pin,gaskets,etc...is only $ 55.00. to get that kind of hp from other engines you are looking at well over $ 325.00 for just the long block and up to $ 500.00 for a complete drop in...
This set up is very particular about pipes though, it will be a turd on one pipe and a beast on another, i know this because o have tried multiple pipes b4 ending up with the CPI Big Bore pipe. That combo pushes the hp up to 5.04hp and 2.03lb/ft of torque with a very nice linear power curve thru out the entire power band.

As far as the Off Road tire, BRP, Bishop Racing Products does offer them, if you wanted to go back to stock HPI style wheels you would simply remove the SUH wheel adapters and re-install the included stock hubs..

If you need anymore info just holler man, the Baja platform is how i make a living and this is only one of mine.

thanks,
Giz.