FS/FT: On road cars AE NTC3, HPI RS4 3, Kyosho FW-05, X-RAY NT18,

[keithbradley]

PRICES ADDED! Scroll to post #8
Someone asked me about these recently so I took some pics for them but it turned out they weren't a serious buyer so I figured I would post them up and see if there is any interest.
I will entertain trades for boats, motors, escs, other RCs, or whatever. Make me a reasonable offer on what you want or an offer on all of it. I would make someone a sweet deal on the entire lot

-First is a HPI RS4 lot. This includes the RS4 Trans Am pictured, along with the extra parts pictured, and 2 extra motors as well. The body, wheels, tires, chassis, and most of the parts except engine and servos is all brand new, never ran. The engine is a OS .15 and the extra engines are another OS .15, and a HPI that I beleive is a .12. I built this car to be a model of my sister's WS6 Trans Am with Z06 wheels but never ran it. Car is as pictured.
As far as extra parts, there are a few 2 speed units, chassis, axles, lots of shocks, pretty much anything you would need. You couls probably build at least another car if not more out of all the extra. It is essentially another 5 parts cars that have been disassembled.

[keithbradley]

Next up is a Kyosho Ferarri, I think it is a FW-05 if I remember correctly. I got it new this past summer, broke it in nicely (I take my time and break all my nitro stuff in correctly using the Murnan method), and ran it a few times. It has some scratches in the body and a crack in the front but other than that the body is still pretty nice. The crack in the front was a result of someone running into a curb while drifting ...that unfortunate occurance broke a front axle and put the crack in the body. I TIG welded a new end one the axle but the body still has the crack
Its powered by a Kyosho .15 on a 2 speed so its lots of fun in open parking lots. I always liked the way this car was built but my 1/10 scale stuff sits around anymore as I end up driving my 1/7 scale brushless road car with the time that I have.

[keithbradley]

Next is a Associated nitro TC3 roller (ARR minus engine/clutchbell). I got this car in a trade and never used it. I have had many more 1/10 scale cars than what Im listing here, so I just never got around to doing anything with this one. Its a nice car with pretty much everything there except teh engine and clutch assembly. Steering servo, throttle servo, pipe, header, ect. all come with it. Tires are newer and in good shape.

[keithbradley]

Up last is a X-Ray NT18. I got this car new but the body I got from someone who had already painted it. The body is definitely nothing to enter in a "best artist award" show but the car is really impressive for such a little guy. The handling is out of this world. These things turn on a dime at full speed. Very nimble with those little foam tires and the .09 nitro engine sounds wicked! The last time I ran this guy the throttle servo started to slip, but I have a mini t around here that I think uses the same servo so I'll send that one with it as a spare. I used a bump box for all my cars, but this one HAS TO be bump started as it is a bump start motor with no place for pull or roto starts. The engine in it hasn't had a ton of use and still runs good(maybe half a quart of nitro, which is more than it sounds like.lol) but I also have another brand new never ran x-ray .09 that I will incude with it. I believe the motors are actually made by picco, but I'm not positive. I am pretty sure it was an italian manufacturer, not asian.

[keithbradley]

I also have some extra wheels/tires that will go with this stuff if purchased together, or maybe go with the rs4 stuff so more cars can be built.

[keithbradley]

I also want to add the following:

-I do have a bump box, its a almost new dynamite dual motor with 12V starter box battery. I would be willing to sell or include that with this stuff, but only if all of it sells. I prefer to use the bump box to start any of this stuff so if I end up keeping some of it I want to keep the box as well.

-Some of this stuff has sat for a little while, so minor maintainance may be needed on some parts, such as cleaning the one way bearings or changing glow plugs. Then again maybe not...I just dont want anyone expecting a brand new car and being mad that the glow plug only lasted xxx amount of time... or the OWB's needed to be cleaned.... or they broke a pull start, ect. I will also not be held responsible for someone's inability to tune or run nitro engines. Its not that hard but I have had people tell me what I sold them didnt run right and when I told them to adjust the high speed needle they didnt know what it was. Unless you live at the same elevation and happen to live in the same climate as the cars were last ran in, you will need to make adjustments. I can help if you ask just dont break it first and then ask.

[Alexgar]

i want the starter box if you sell all of it

[keithbradley]

I've had a couple people ask about prices...I was hoping for offers but I know its difficult to know what to offer on something when there is no price listed so I will just put some prices out there.
I'm not the type to list stuff at a high price and bargain down, I would rather just put out there what I will take and any potential buyer can decide if they want it or not. I may take offers lower than what I ask IF MULTIPLE ITEMS ARE PURCHASED, so if you want to make me a lower offer on a package deal, go ahead. I'm not, however interested in selling an item listed without what comes with it for a lower price (make sense?). In other words if you dont want a spare motor or parts with a car or something its still the same price. I'd rather not sell to 20 different people.

RS4 with all RS4 extra parts and extra engines (not the x ray engine)............$200

Kyosho Ferarri.............$165

Nitro TC3 roller with pipe, header, servos........$90

X-Ray NT18 with extra New .09 engine..........$100

As I said if you want it all, or more than one of those, I'll make you a deal better than the individual prices...offer away

[Silverdragon]

Nitro cars!!!!

Hey Keith,,check out my ads here on OSE,,i have my wicked upgraded modded mini hydro and UL-1 Superior and a couple of my Dragster's here on OSE,,RCU had been acting up so much i havent posted anything there latley,,,i am interested in the Kyosho and Nitro tc3 or maybe the whole lot if any of my ads may intrest you,,i will bump them all since i havent in a few days so you can find my ads,,thx,,Bobby

[keithbradley]

Hey Keith,,check out my ads here on OSE,,i have my wicked upgraded modded mini hydro and UL-1 Superior and a couple of my Dragster's here on OSE,,RCU had been acting up so much i havent posted anything there latley,,,i am interested in the Kyosho and Nitro tc3 or maybe the whole lot if any of my ads may intrest you,,i will bump them all since i havent in a few days so you can find my ads,,thx,,Bobby

PM sent