BJ26/Elam Motor and ESC combo

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • syncronized77
    Senior Member
    • Jun 2010
    • 277

    #1

    BJ26/Elam Motor and ESC combo

    Hey guys,

    Pulled this off my Elam and has been sitting in my toolbox just collecting dust. Its probably been used about half a dozen times on 4S with the stock prop...so its never been over heated.

    I did literally drop the ESC 30 min ago and one of the caps popped off, but I did test it afterwards and it still arms and still runs the motor...you can probably solder on a new cap. Also, I noticed that the on/off switch is stuck in the 'on' position...but as stated before is still fully functional

    Motor - $30USD shipped via PP gift SOLD
    ESC - $15USD shipped via PP gift SOLD



    Last edited by syncronized77; 12-07-2010, 02:36 PM.
    Go Brushless or GO HOME
  • monojeff
    Moderator
    • Nov 2010
    • 2547

    #2
    I am interested int the ESC provided I can fix the cap.
    I am new to all of this so want to make sure first.
    OSE GIFTING ELF
    HAPPY HOLIDAYS!!

    Comment

    • dana
      Banned
      • Mar 2010
      • 3570

      #3
      ha! i had the same problem with my elam esc..... go figure. great price tho

      Comment

      • monojeff
        Moderator
        • Nov 2010
        • 2547

        #4
        Sorry I'm gonna pass on this it's to small a esc for me thanks.
        OSE GIFTING ELF
        HAPPY HOLIDAYS!!

        Comment

        • LiPo Power
          DJI Drone Advanced Pilot
          • May 2009
          • 3186

          #5
          Great strong 4-5s motor and good price
          DJI Drone Advanced Pilot
          Canada

          Comment

          • greenblast
            Senior Member
            • Apr 2007
            • 292

            #6
            i am interested can you list specs. if 36 56 and 45 amp esc ill take them greenblast

            Comment

            • Alexgar
              Fast Electric Addict!
              • Aug 2009
              • 3522

              #7
              that motor is a rocket on 6s

              Comment

              • syncronized77
                Senior Member
                • Jun 2010
                • 277

                #8
                Originally posted by greenblast
                i am interested can you list specs. if 36 56 and 45 amp esc ill take them greenblast
                Brushless motor specs (take from the Proboat website):

                Specs
                Type: Brushless
                Bearings or Bushings: Two 5 x 11 x 5mm Bearings
                Voltage: 10-21
                RPM/Volt (Kv): 1500
                Continuous Current: 45
                Speed Control: PRB3309
                Overall Diameter: 36mm
                Shaft Diameter: 5mm
                Shaft Length: 18mm
                Overall Length: 74mm

                And yes, its the 45amp ESC that came with the Elam and BJ26.

                I'd hold on to it if I wasn't a 4S kind of guy LOL...because as everyone's stated, the motor is pretty reliable on 5S and a missile on 6S.
                Go Brushless or GO HOME

                Comment

                • greenblast
                  Senior Member
                  • Apr 2007
                  • 292

                  #9
                  i was hoping it was a shorter can with more kv. i will have to pass. if you want to sell just the esc i will take it. thanks don

                  Comment

                  • syncronized77
                    Senior Member
                    • Jun 2010
                    • 277

                    #10
                    Originally posted by greenblast
                    i was hoping it was a shorter can with more kv. i will have to pass. if you want to sell just the esc i will take it. thanks don
                    I actually just measured the motor...its 36mm diameter/56mm can length...the overall length the website states is probably including the wires LOL!

                    Either way, pm sent...
                    Go Brushless or GO HOME

                    Comment

                    • yellowbird
                      Member
                      • Sep 2010
                      • 44

                      #11
                      ProBoat Motor

                      Hello Ed

                      I'd like the motor if greenblast doesn't. I can send PP to the same address as before.

                      - yellowbird
                      Last edited by yellowbird; 12-06-2010, 01:08 PM. Reason: Added comment

                      Comment

                      • greenblast
                        Senior Member
                        • Apr 2007
                        • 292

                        #12
                        pay pal sent for esc thanks greenblast

                        Comment

                        • syncronized77
                          Senior Member
                          • Jun 2010
                          • 277

                          #13
                          Originally posted by yellowbird
                          Hello Ed

                          I'd like the motor if greenblast doesn't. I can send PP to the same address as before.

                          - yellowbird
                          Hey!

                          Sure, no worries....greenblast has passed on the motor, so its yours, if you still want it. PM sent.

                          Thanks

                          E
                          Go Brushless or GO HOME

                          Comment

                          • yellowbird
                            Member
                            • Sep 2010
                            • 44

                            #14
                            BJ26/ Elam Motor

                            PP sent - motor sold!

                            Comment

                            • greenblast
                              Senior Member
                              • Apr 2007
                              • 292

                              #15
                              got the esc today. looks good, thankyou and happy holidays . Don

                              Comment

                              Working...