Tweet
SOLD
H&M Micro Kat tunnel hull
H&M Micro Kat tunnel hull
*each underlined header is a link*
Hull:
Length: 365 mm or 14.4 in
Width: 216 mm or 8.5 in
Flood chamber installed
Self-rights in 12 seconds
100% water tight
Carbon fiber on the floor, transom, and flood chamber wall.
Cost = $118 + shipping from Germany
Condition = (used for 2 runs and a major tub test)
Motor:
2848SL 3900kv Brushless Inrunner (WaterCooled)
Kv: 3900rpm/v
Diameter: 31mm
Length: 60mm
Shaft diameter: 3.17mm
Weight: 153g
Cost = $37.95 + shipping from Hong Kong
Condition = (used for 2 runs)
ESC:
Castle Creations Barracuda-80A
Continuous 80 amps
Resistance = 0.001 ohms
Brake = Programmable
Reversible Yes - change any two wires
Low Voltage Cut-off = Programmable
Size = 1.05 x 2.65 x 0.45"
Weight (w/wires) = 2.1 oz (60g)
Waterproof
Cost = No longer available. Avg price $50- $80
Condition = (lightly used)
Servo:
Futaba S3115 Micro Precision Servo
Torque: 39 oz-in (2.8 kg-cm)
Speed: 0.15 sec/60°
Dimensions: 1.1 x 0.5 x 1.2" (1-1/8" x 1/2 x 1-3/16")(28 x 13 x 30mm)
Weight: 0.60oz (5/8oz) (17g)
Lead Length: 6.5" (165mm)
Cost = $19.95 + shipping
Condition = (used for 2 runs)
Motor mount:
Etti adjustable motor mount
19mm motor mounting holes
Fits 380 to 480 sized Motors
Cost = $19.99 + shipping
Condition = (used for 2 runs)
Strut bracket:
Octura Long Bracket
Cost = $12.95 + shipping
Condition = (used for 2 runs)
Strut:
Fullers 1/8 strut
Cost = $19.95 + shippingCondition = (used for 2 runs)
Rudder:
Rudder for Formula Fastech by Pro Boat
95mm long
25mm wide
Water pick-up
Cost = $18.99 + shipping
Condition = (used for 2 runs)
Outboard:
AquaCraft Outboard Upper Cover EP1
Length: 2-3/4" (70mm)
Width: 1-3/4" (45mm)
Height: 2-3/4" (70mm)
Cost = $6.29 + shipping
Condition = (used)
Drive line:
Octura .098 flex cable with 1/8" prop shaft
Cost = $19.99 + shipping
Condition = (used for 2 runs)
Coupler:
Octura Coupler Flex Hex
1/8" to .098 Cable
Cost = $9.95 + shipping
Condition = (used for 2 runs)
Boat stand:
Custom PVC stand (needs to be glued together)
Prop:
Not included
Radio system:
Not included
Information:
This boat is a "mock" outboard. The motor is mounted in the hull, but the outboard will turn with the rudder. See video
Decals are NOT cleared over, so they can be removed.
There is a small crack on the flood chamber opening that is strictly cosmetic. I didn't have time to clean it up.
Reason for selling:
Need to fund my 2011 race boats
Price:
Over $330 total,
Asking $180 Shipped ConUS
All others please ask
Pictures:
Comment