Selling 6S carbon Fiber/Kevlar SAW rigger

[gerardobrandao]

Hello


Going to sell mine 6S carbon fiber/kevlar rigger.Boat is totally made from carbon fiber and kevlar, including Sponsons, sponson tubes,and ride pads!the sponsons have tunable angle of attack,from 2º to 8º.
Hull is very light and very stiff.
All hardware is machined aluminium T7075 T6 .
The hull includes a NEW HI-AMP lehner 2250/5, 8mm shaft ,and also forced air colling!
Motor only was used one time...
Also has an ultra speed digital servo hitec 6965HB
Boat have received,after the photos were taken 3 layers of automotive crystal clear lacquer.Boat has almost mirror finish.

Here follows some photos:













Extremely good handling hull,that you can see in this video when i bet the Portuguese national speed record!




Selling for best offer!

[Anbjorn]

I will start out with a bid of $500
Anbjørn

[gerardobrandao]

Rigger for sale

Hello Anjborn!



500$ dollars almost doesn´t pay the motor, like i told you the motor was used 1 time.
Of course there is the depreciation, of the motor isn´t unused, but not so many!
I have almost 300€ only in carbon fiber, 1st quality, not the east one , development, construction, and unique feature that is the only one.

checkout the price of the graupner SX4000 , hull only!


Mine has 40 inch

Best Regards

[JMSCARD]

are the bids supposed to be Shipped bids....? or just the cost of the boat? what would it cost to ship the boat to the states? if you could help by letting us Know your location and dimensions of the box it would go in if you want us to get our own shipping quotes.... and let the bidding get started... easy on anbjorn..... remember he said he'd "start" the bidding at $500....

[LiPo Power]

Do you race?
If yes, do you have to slow down so much before the turn and why?
Thanks
Robert

[gerardobrandao]

Riiger for sale...

Bids doens´t include shipping!

The box would be at least 45inch*12inch*15inch, since sponsons are removable!

Post code:

4475-483

Country:

Portugal



LiPo Power

Do you race?
If yes, do you have to slow down so much before the turn and why?
Thanks
Robert

Yes i race, alotugh we are so few that isn´t worthing competting here in Portugal, unless i was a nitro fan, but i´m not!


That is a pure SAW rigger, no turn fin..diehdral on the sponson bottoms is very small, so as you imagine such a "flat" area, withou any turn fin, the rigger doesn´t turn!


Attention to all, this is a SAW rigger, only!

Best Regards

[gerardobrandao]

2 more photos with the automotive lacquer applied:

[Anbjorn]

Gerardo,
As I said, it was a starting bid of $500.
Bidding has to start somewhere so I did.
Believe me I know very well what new Lehner motors cost as I own 3 already.
As for carbon fibre and kevlar, I have to pay about €70 pr. square meter for good quality material here in Norway.
Not many people do race SAW seriously. People that do, also know what it means buying a second hand SAW boat, regardless of how few runs it has.
So since nobody else here has upped my bid I will do that myself.
$600 if you include a very good prop for it
Anbjørn

[Romke]

Gerardo,

Cloud you give me a price indication? and do you sell the boat without the motor. Did you build this one yourself or did you buy it? I have to say it is beautiful!

If you don't wanna put the price in the topic give me a PM.

Romke

[Anbjorn]

Gerardo,
I could be interested in the motor only if Romke want the hull.
Anbjørn

[gerardobrandao]

6S Rigger

Gerardo,

Cloud you give me a price indication? and do you sell the boat without the motor. Did you build this one yourself or did you buy it? I have to say it is beautiful!

If you don't wanna put the price in the topic give me a PM.

Romke

Hello Romke


I´m receiving offers trough private messages!
You can give your offer,trough the forum or by PM.
Your decision...

Yes i can sell the boat without the motor and servo.
Yes, i build it mineself, the one who takes, can say that has the only one in the world..

Best Regards

[gerardobrandao]

Rigger for sale..

Gerardo,
I could be interested in the motor only if Romke want the hull.
Anbjørn

Hello Anjborn.

You can send me an offer for the motor.....


Best Regards

[gerardobrandao]

Gerardo,

Cloud you give me a price indication? and do you sell the boat without the motor. Did you build this one yourself or did you buy it? I have to say it is beautiful!

If you don't wanna put the price in the topic give me a PM.

Romke

PM sent Romke


Best regards

[gerardobrandao]

Carbon fiber hull with Hardware sold....Buyer Uknown :D

Still Motor available Lehner 2250/5

Best Regards

[gerardobrandao]

Motor available

Lehner 2250/5 WK with fan cooling (extra) + 8mm shaft(extra) including water cooling collet(extra)

Extreme power for 4S P hydro SAW or Q Hydro SAW 6S