Miss Budweiser for sale

[blackcat26]

Here is a used Miss Bud 1/12th scale with rough paint but super strong. Has carbon fiber floor and 2 part foam in front sponsons and rear ride pads. Bulkheads installed, traxxis 2056 servo comes epoxied in with an etti motor mount. Setup for 3/16 flex (no teflon needed) for serious power and has velcro straps ahead of motor mount which can hold 2 3s batteries as long as the motor is not too long. Super solid boat but needs painted. SOLD SOLD SOLD

[blackcat26]

bump

[tth]

Was this hull originally the solid driveline that was converted to flexcable? Also if you can describe why and where it would need paint. Is it just cosmetic or was it damaged and repaired? Thanks I have a friend that may be interested. He has cash in hand but I have the paypal acct. Thanks in advance.

One more question how old is this hull and are you the original owner?

[blackcat26]

Yes boat came factory with a sold drive and has been converted over to flex. Paint was kinda crappy when dad bought this thing on ebay and had some slight nitro damage. Just a few small spots by the rear "wings". Has been patched and somewhat painted but to be perfect I would remove the decals and repaint. Front sponson bottoms are better than factory with some work I did but still are not perfect. Boat however is super solid and very very sturdy now. As of the age of this wull I have no idea. Canopy is slightly mismatched now to the body but not terrible. I would ask a lot less but it has about $60-70 worth of hardware on it.

[tth]

Thanks for the answers....my friend has turned his interest to a catamaran. I think the hydro intimidates him a little. He likes to take "baby steps" Good Luck with the sale.

[blackcat26]

Thanks. Open to offers.....

[mike robson]

interested in a trade ?

[blackcat26]

What kind of trade you thinking?

[mike robson]

whatcha lookin for

[calcagno45]

What's a favorable motor setup for this hull? Would a CC1518 be too much in this boat? or would it fit?

[blackcat26]

The motor that came out of it is 65mm long and can fit 2 3s batts in front of it. 70mm long can might be the max before batteries won't fit. I had an Align 600xl in it on 6s.

[blackcat26]

Picture of motor and battery orientation. Price drop to $100 shipped. Motor and batteries for reference only see original pics.

[Krowbar69]

Man... if i didn't have two boats on the way here, i'd jump on that.. Nice boat!

[blackcat26]

Somebody needs this boat....Setup for high speed it is..

[blackcat26]

Bump