need motor

[driftah]

anyone got a feigao 8xl or something similar to run a df29 hull?

[MARKBRENNAN]

Motor

I have a supervee motor and a motor mount brand new. Asking 77.00 for both.

[driftah]

lookin for something with a little more juice than my ul-1 motor ..but thanks anyways bud.I was told and shown an 8xl on 4s rocks this hull good.Plus I had a sv27 motor fall apart on me lately so not too thrilled with it although others swear by it.The endcaps come loose and kaput

[FighterCat57]

Pssst. Try an outrunner. =)

[driftah]

lmao which one bud? somethin to boogie on 4s and a t180 esc,42x55 prop...

[driftah]

heard good things about the scorpions and the one from hobbyking but???????

[ray schrauwen]

I have pair of 2200KV Turnigy outrunners. I would sell one but, better, I'll let you try it first. If you like it and it works for you, you can pay me the $25 I paid for each.

Don't get me wrong, I like these motors but, don't need 2 really. I have a pair of killer motors for my EKOS already.

let me know...

I should try one in my 29" DF knock off. Was going to anyway...


BTW, these are very rare discontinued motors as HobbyKing stopped selling them a while back. Don;t know why?

[JMSCARD]

what about a on sale Castle 1512... I have been debating putting one in mine as I have a new one on the workbench... I am running a 10xl in mine currently on 4s2p with a x447 with 43mph speed....

[ray schrauwen]

Another very good motor.

[Jesse J]

I gotta medusa sittin here, would work perfectly in your 29"er. see my sale thread.

[driftah]

2 problems here guys....one is that the boat i am tossing it in has rails and a williams racing mount that originally housed an 8xl,second is that i have to be careful to use a waterjacket that will fit in between the clamp system ugh.so I was thinking an 8xl with the ose short style black anodised waterjacket on it???? and anyone know if I can use the flexshaft from a sv27 .150 to 3/16 on that df29 as it has the fullers hardware with a strut not a stinger???? any other suggestions that are in stock would be helpful.

[driftah]

the castle 1512 is only an 1800kv though... I kinda wanted higher as I will be usin a 42x55 or s220 prop with it.and is it heavier than the 8xl or?????? tryin to keep a good balance of weight and speed goin here lol.4s and the t180 esc and a servo will be goin in too so.....I dont want a sinkin ship

[Dangerous_Toys]

I have a 9XL with only 3 runs on it.

[driftah]

ok so I am settled on an 8xl or something of that kv range the 9xl is maybe too low thx tho

[FighterCat57]

I have pair of 2200KV Turnigy outrunners. I would sell one but, better, I'll let you try it first. If you like it and it works for you, you can pay me the $25 I paid for each.

Don't get me wrong, I like these motors but, don't need 2 really. I have a pair of killer motors for my EKOS already.

let me know...

I should try one in my 29" DF knock off. Was going to anyway...


BTW, these are very rare discontinued motors as HobbyKing stopped selling them a while back. Don;t know why?

I have 6 of them coming from the MFR sometime in the next 3 quangdings.