200 amp himodel esc...

[JMSCARD]

here is a esc (believe it to be a Hi-Model.. correct me if I am wrong) I am not going to use... you guys tell me what its covered in again... lol... I cant think of the name of the stuff.... anyway it works great has no bec.... and is good for 2-7s but most recommend with these to only go to 6s.... would be a great esc for a boat that gets a little soggy...lol... it does has a little crud in the heatsink that can easily be removed with a xacto... I didn't even try to get it out as I just haven't needed it... I have too many esc's....

$40 shipped in the US 48.

[swampthing71]

"I have too many esc's...."

Got anything that will handle an 8s setup laying around?

[JMSCARD]

"I have too many esc's...."

Got anything that will handle an 8s setup laying around?

my turnigy monster 2000 in the swap shop too

http://forums.offshoreelectrics.com/...ad.php?t=17385

.... or I also have Castle HV240 Hydra with a large etti Extra Cap board installed.... $295 shipped for that one...the hydra is sweet....

You are gonna need a HV esc either way to run 8s.. they never come to awful cheap..... you aren't going to find a HV Higher amp esc anywhere for less then $100....

[driftah]

hmmm

would this esc be ok to run in a 32" mono with a leopard 4074 2200kv on 4s?

[swampthing71]

Appreciate the quick reply....I've been eyeballing those ESCs but I'm having trouble parting with the cash as I am poor boy boater (quickly learning those two dn't mix) LOL. If you don't sell the Monster 2000 by next friday (pay day) let me know.

[JMSCARD]

would this esc be ok to run in a 32" mono with a leopard 4074 2200kv on 4s?

yes... i would upfit it with watercooling by adding a cooling plate the steve sells here at ose... could mount it atop the heatsink..... just to be safe.... these are actually good esc's for the money...

[Brushless55]

I agree these esc's are great!
I have 3

[FighterCat57]

yes... i would upfit it with watercooling by adding a cooling plate the steve sells here at ose... could mount it atop the heatsink..... just to be safe.... these are actually good esc's for the money...

The ETTI 044 plate is the exact size and the frency fry box fits as well.

Thermal grease the contact point.

[JMSCARD]

bump

[ray schrauwen]

The ETTI 044 plate is the exact size and the frency fry box fits as well.

Thermal grease the contact point.

They fit? sweet...

[carnalito]

I'll take ti send pp.

[keithbradley]

J your PM inbox is full...
I was going to send you a PM and see if you have any pics of that cat you can send me (inside, ect).

[JMSCARD]

Sorry I Have been hung over today... A little off the ball here.... My paypal addy is

Jmshedd1@hotmail.com

and keith I will clear my pm box....

[runzwithsizorz]

Pretty nice ESC, ( electronic SUMP-PUMP controller ), ya got there, JMSCARD

[JMSCARD]

Sold to Carnalito... sent out too...