FS: EKOS Outrunner Kit

[FighterCat57]

I've put together an outrunner kit for the EKOS & other clones. This kit should be good for ~55mph + on 4s. It is a high RPM capable setup. It should also be a good reliable 3s setup.

The kit includes:
4 Ceramic Hybrid Boca Bearings
2 Jeff Wohlt Cables
2 Cable Liners
2 Aluminum Couplers
2 32mm Venom Props
2 Aluminum Tapered Prop Nuts
2 Nickel Plated Wheel Collars
2 600watt 2900Kv Outrunner Motors
4 Water Inlet/Outlets (to use the water cooling feature of the stock mounts)

All parts are new. Results may vary. You know how it goes.

I was going to install this setup in my EKOS, but have decided not to pursue any further EKOS Adventures. My loss, your gain. I paid over $150 for all of this... You can have it all for...

$100 Shipped

International- Calculate USPS Small Flat Rate Box

[britscoot]

Hi

whats the diameter of the prop shaft.The solid shaft.

Thanks

[FighterCat57]

The EKOS uses 4mm hard prop shafts.

[britscoot]

Thats what i thought but tower says 3mm.
Are yours upgraded and what size is the flex shaft?130?

If i was king all flex shafts would be the same size!

too confusing....lol

[FighterCat57]

Thats what i thought but tower says 3mm.
Are yours upgraded and what size is the flex shaft?130?

If i was king all flex shafts would be the same size!

too confusing....lol

The stock cables are 3mm which is close to .130, close enough the .130 couplers work on 3mm cables.

These are .130 cables & couplers w/4mm hard shafts threaded M4. A thinner liner allows the slightly larger cable in the same stuffing tube.

I agree about confusing. There are fractional, decimal and millimeter sizes and some interchange... Yuck.

[britscoot]

I would like to buy some of the parts if you part it out.

Hope that makes sense..haha

[britscoot]

i basically need half of the package.
The half that spins anti clockwise.normal way.

Thanks

[FighterCat57]

i basically need half of the package.
The half that spins anti clockwise.normal way.

Thanks

Well, it's a good deal, you could buy the whole setup and re-sell what you don't use. It's just too tailored to an EKOS to break up IMO.

[britscoot]

yeah i hear you.
Maybe some one will come in and want the half i dont want...lol
Or convert my hydro to twin props....

[FighterCat57]

yeah i hear you.
Maybe some one will come in and want the half i dont want...lol
Or convert my hydro to twin props....

Twin props sound wicked. Especially outrunners.

[britscoot]

i put an out runner in my hydro and tested today.
I dont have to say how fast it was.
It did take out the shaft though...lol

I cant imagine how crazy 2 would make it.

[FighterCat57]

i put an out runner in my hydro and tested today.
I dont have to say how fast it was.
It did take out the shaft though...lol

I cant imagine how crazy 2 would make it.

These aren't the big ones, these are lightweight efficient little motors.


$100 shipped.

[FighterCat57]

Will entertain trades.

ESC's, Motors, etc.

[scubasteve95]

Payment sent

[FighterCat57]

Payment sent

Boxed & ready to ship. Thanks!