Max Amps Batteries For Sale(brand new)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • danielplace1962
    Member
    • May 2010
    • 91

    #1

    Max Amps Batteries For Sale(brand new)

    Have a pair of Max Amps 3250mah 3S 11.1 volt Lipo's.
    Brand new.

    $80 each or $150 for the pair shipped to LOWER 48 ONLY.

    Also have a pair of Max Amps 3250mah 4S 14.4 volt LiPo's.
    Brand new.

    $100 each each or $175 for the pair shipped to LOWER 48 ONLY.

    Paypal [email protected]

    Thanks,




    Last edited by danielplace1962; 09-04-2010, 12:07 AM.
  • danielplace1962
    Member
    • May 2010
    • 91

    #2
    10/17/2010
    Still have these for sale.

    Comment

    • tborisch
      Member
      • Sep 2010
      • 49

      #3
      Daniel, why didn't bruce use them on the mini mystic?

      Tom

      Comment

      • danielplace1962
        Member
        • May 2010
        • 91

        #4
        Tom,
        The Lehner 1920 motors were 2S (7.4v) motors. The batteries were 3S(11.1v) and 4S(14.4v) packs. The ESC's were HV models and not 2S compatible.

        We went to Castle 240 LV ESC's and 2S2P with two Hyperion 2S(7.4v) 5500 mah packs per motor.

        Comment

        • tborisch
          Member
          • Sep 2010
          • 49

          #5
          Originally posted by danielplace1962
          Tom,
          The Lehner 1920 motors were 2S (7.4v) motors. The batteries were 3S(11.1v) and 4S(14.4v) packs. The ESC's were HV models and not 2S compatible.
          Weird, Ernest at MHZ custom ordered the motors from Lehner and told me to order those bats and those esc's.

          Tom

          Comment

          • danielplace1962
            Member
            • May 2010
            • 91

            #6
            A mistake was made there somewhere. We didn't want to believe it either but after MUCH research concluded what we had would make lots of smoke.
            Lehner confirmed them to be 7.4 volt max as did other electric guru's. ???

            We are trying to get props and prop shafts from MHZ designed for the hull also it didn't like the two bladers, well we think that could be part of the issue. Have a bit a negative in the struts, working to recess the jackstands so we can get them closer to neutral.

            This is the prop and shaft kit for the boat.
            It has the reduced diameter drive dogs to match the smaller diameter props the hull uses and 3 blade props. We'll see how she does.



            Correspondence with Lehner,

            I have a pair of 7 wind Lehner 1920 motors. They are the model with the integral cooling fan. Can you tell me what is the Maximum voltage these motors can handle?
            Would like to run 3S (11.1 v) or 4S(14.4 v) but worried these might only be for 2S(7.4 volt).
            Thanks,
            Daniel Place

            Their reply,

            Hello,
            normally we say:
            1920 = 2s Lipo
            1930 = 3s Lipo
            1940 = 4s Lipo
            1950 = 5s Lipo

            I don`t recommend you 3s or 4s...

            Best Regards
            Andreas Lehner
            LMT-Team
            Last edited by danielplace1962; 10-18-2010, 12:17 PM.

            Comment

            Working...