Turnigy 80hv (unused)

[forescott]

I have a turnigy 80hv I bought from diesel that I was gonna use in my p-1. Its not gonna work for me so its for sale. Has never been used. $55/shipped to the US.

[Diesel6401]

I don't remember selling that esc, or do I lol J/K.

Great esc I bought it from HK back in June, just to add some extra information to the sell. Good luck.

[FighterCat57]

I have a turnigy 80hv I bought from diesel that I was gonna use in my p-1. Its not gonna work for me so its for sale. Has never been used. $65/shipped to the US.

Yeah it will!

Get one of the new HK outrunners in 1100kv or 880kv and run 8 or 10s! Two moderately sized 4-5s packs and you're golden!

JMO, good luck with the sale.

[forescott]

Yeah it will!

Get one of the new HK outrunners in 1100kv or 880kv and run 8 or 10s! Two moderately sized 4-5s packs and you're golden!

JMO, good luck with the sale.

Problem is, the hull is soo narrow, I dont think it will handle well with a large diameter prop. Better of with a smaller-ish prop with more pitch to keep the torque-roll under control. @ 28000 rpm on 6s the ammo would need something like an m445. I'm hoping a 640 will suffice with the stock outrunner.

[forescott]

$60/shipped??

[FighterCat57]

Problem is, the hull is soo narrow, I dont think it will handle well with a large diameter prop. Better of with a smaller-ish prop with more pitch to keep the torque-roll under control. @ 28000 rpm on 6s the ammo would need something like an m445. I'm hoping a 640 will suffice with the stock outrunner.

Ah, gotcha, didn't think about the clearance on the stinger for the prop.

[FighterCat57]

$60/shipped??

I'm so tempted! I just ordered one recently though...

Maybe a good candidate for a Typhoon 1100kv on 8s.

[forescott]

one last price drop.

[RCKong]

Payment sent...good deal Thanks !!!

[forescott]

Payment received. Will ship out tomorrow! Thanks!!

[forescott]

[Jacked1]

I'm so tempted! I just ordered one recently though...

Maybe a good candidate for a Typhoon 1100kv on 8s.

If this has the same circuit as the 100amp turnigy it won't work with the typhoon on 8s . I tried it in my surge and it has sync loss on 8s.
But it can't be 100% the same because they are totally diff sizes.

[FighterCat57]

If this has the same circuit as the 100amp turnigy it won't work with the typhoon on 8s . I tried it in my surge and it has sync loss on 8s.
But it can't be 100% the same because they are totally diff sizes.

Interesting. Wonder why.

[Jacked1]

Interesting. Wonder why.

It has to switch too fast, it is an 8 pole outrunner spinning at 32000 rpm I would say a nice 2 pole or 4 pole would be perfect! Like the kda 36-74 1100kv or the kb45 700kv or a low kv leopard. I know the 100amp will work with the 800kv T600 on 8s tho so i should be good for my big twin mono. I would really like to go to 10s tho so i might have to go with twin kb45s or similar if they get out of sync too.

[FighterCat57]

It has to switch too fast, it is an 8 pole outrunner spinning at 32000 rpm I would say a nice 2 pole or 4 pole would be perfect! Like the kda 36-74 1100kv or the kb45 700kv or a low kv leopard. I know the 100amp will work with the 800kv T600 on 8s tho so i should be good for my big twin mono. I would really like to go to 10s tho so i might have to go with twin kb45s or similar if they get out of sync too.

You were using a Pentium 100 HV? http://www.hobbywing.com/upload/manual/hw-04.pdf

It has a stated limitation on RPM and poles:
7. Maximum speed: 210000 RPM (2 poles motor), 70000 RPM (6 poles motor), 35000 RPM (12 poles motor).

The 80HV appears to be different. http://www.hobbywing.com/upload/manual/HW-15.pdf

I couldn't find a restriction based on poles or RPM, so it should work with the Typhoon on 8s.