Tweet
SOLD
This Chopper is new and has never been flown. It has sat in the case under my bed in hope that one day I'll take her out. I thought I would share it here with you gentlemen and let you guys throw your offers at me. If an offer tickles me I'll have to say goodbye to her. So dont be shy, and if you think you should own her then convince me that she belongs in your hands instead of mine!First off I'll give you the specs on the Chopper and the Radio, and Second will be the pics to follow......
Walkera 60B Specification
Receiver: RX-2801E
Gyro: WK-G011
All-up Weight: 620-640g (Battery included)
Transmitter: WK-2801E
Brushless Main Motor: WK-WS-26-001
Brushless Speed Controller: WK-WST-30A
Brush Main Motor: 380PF
Tail Rotor Dia.: 145mm
Main Rotor Dia.: 620mm
Battery: 11.1V 1200mAh/1500mAh Li-Po
Brush Speed Controller: WK-B20A
Overall Length: 600mm
Servo: wk-7.6-H / weight 6.4g / speed 0.085sec/60°(4.8V) / torque 0.8kg/cm (4.8V) / dimension 21.5*11.8*21.7mm
Servo: wk-7.6-3 / weight 8.5g / speed 0.11sec/60°(4.8V) / torque 0.9kg/cm (4.8V) / dimension 22.5*11.5*24mm
Walkera 60B Features
CCPM mixing control system and collective pitch control system make perfect 3D maneuvers such as rolls, inverted, and swoop flights.
60#B The compact structure characterized by metal main frame and metal tail boom makes the helicopter more stable. Easy-to-be mounted parts like servo are used.
60#B Highly efficient bevel wheel design is used in mesh between main gear and motor gear.
Tail blades driven by belt provide easy adjustment, stable flight, and low noise.
Equipped with high performance brush/brushless motor, the flight time will be up to 6 to 8 minutes at 11.1V 1200mAh/1500mAh LiPo battery pack, depending on your flight mode.
New 2.4G technology, with the functions of identification and precise code pairing, can allow many RC aircrafts to fly in the same field and same time.
WK-2801E Specification
Encoder: 8 channel micro computer system
Frequency: 2.4G spread spectrum
Output Power: ≤10Mw
Current Drain: ≤120mA
Power: 1.2VX8 NiCard (9.6V600mAh) or 1.5VX8 AA dry batteries
WK-2801E Features
The WK-2801E adopts 2.4Gig spectrum technology and features automatic code pairing and ID assignment.
LCD display of the WK-2801E is simple to understand and easy to set.
The transmitter case is ergonomically designed and the large LCD display has white backlight with easy-to-read graphics.
The length or tension of the controls stick can be adjusted and it is convenient to change the throttle from left to right.
The WK-2801E supports both helicopters and airplanes. It offers three helicopter flight modes and each flight mode is capable of free setting and adjusting parameter in order to suit the various requirements of F3C or 3D aerobatic flights.
Capable of wireless data copy and transfer between two transmitters.
Four Adjustable hot keys facilitate easy entry into the set menu.
Eight model memory storage.
Gyro rate adjustment by transmitter, and convenient programmed hover and 3D flights[/SIZE]
Now for the pics.....
This Chopper is new and has never been flown. It has sat in the case under my bed in hope that one day I'll take her out. I thought I would share it here with you gentlemen and let you guys throw your offers at me. If an offer tickles me I'll have to say goodbye to her. So dont be shy, and if you think you should own her then convince me that she belongs in your hands instead of mine!First off I'll give you the specs on the Chopper and the Radio, and Second will be the pics to follow......
Walkera 60B Specification
Receiver: RX-2801E
Gyro: WK-G011
All-up Weight: 620-640g (Battery included)
Transmitter: WK-2801E
Brushless Main Motor: WK-WS-26-001
Brushless Speed Controller: WK-WST-30A
Brush Main Motor: 380PF
Tail Rotor Dia.: 145mm
Main Rotor Dia.: 620mm
Battery: 11.1V 1200mAh/1500mAh Li-Po
Brush Speed Controller: WK-B20A
Overall Length: 600mm
Servo: wk-7.6-H / weight 6.4g / speed 0.085sec/60°(4.8V) / torque 0.8kg/cm (4.8V) / dimension 21.5*11.8*21.7mm
Servo: wk-7.6-3 / weight 8.5g / speed 0.11sec/60°(4.8V) / torque 0.9kg/cm (4.8V) / dimension 22.5*11.5*24mm
Walkera 60B Features
CCPM mixing control system and collective pitch control system make perfect 3D maneuvers such as rolls, inverted, and swoop flights.
60#B The compact structure characterized by metal main frame and metal tail boom makes the helicopter more stable. Easy-to-be mounted parts like servo are used.
60#B Highly efficient bevel wheel design is used in mesh between main gear and motor gear.
Tail blades driven by belt provide easy adjustment, stable flight, and low noise.
Equipped with high performance brush/brushless motor, the flight time will be up to 6 to 8 minutes at 11.1V 1200mAh/1500mAh LiPo battery pack, depending on your flight mode.
New 2.4G technology, with the functions of identification and precise code pairing, can allow many RC aircrafts to fly in the same field and same time.
WK-2801E Specification
Encoder: 8 channel micro computer system
Frequency: 2.4G spread spectrum
Output Power: ≤10Mw
Current Drain: ≤120mA
Power: 1.2VX8 NiCard (9.6V600mAh) or 1.5VX8 AA dry batteries
WK-2801E Features
The WK-2801E adopts 2.4Gig spectrum technology and features automatic code pairing and ID assignment.
LCD display of the WK-2801E is simple to understand and easy to set.
The transmitter case is ergonomically designed and the large LCD display has white backlight with easy-to-read graphics.
The length or tension of the controls stick can be adjusted and it is convenient to change the throttle from left to right.
The WK-2801E supports both helicopters and airplanes. It offers three helicopter flight modes and each flight mode is capable of free setting and adjusting parameter in order to suit the various requirements of F3C or 3D aerobatic flights.
Capable of wireless data copy and transfer between two transmitters.
Four Adjustable hot keys facilitate easy entry into the set menu.
Eight model memory storage.
Gyro rate adjustment by transmitter, and convenient programmed hover and 3D flights[/SIZE]
Now for the pics.....
? WHAT RULES?
Comment