boats and motors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • treystoys
    Senior Member
    • Oct 2007
    • 163

    #1

    boats and motors

    Reasonable offers accepeted on all items, need to move a few more items! Thanks for looking guys/girls!

    Alright guys so I went through my stuff and decided to see what I can part with.

    First are the motors, all pictured are Hackers from left to right b50 10L(sold) b50 8L, b50 8S, b40 8L...all except the b40 are 5mm shafts. I also have a Chili peper 6S 1/8" shaft that I have to dig up. $120 plus shipping each for the 10l and 8l and $100 plus shipping each for the 8s and b40 8L



    Next is my H&M no-step 2 mono, fine/speedmaster harware, lehner 1940 8 turn 1959 kv, schultze 105wo, built by me, run maybe 6 times never heat raced $370 plus shipping for everything minus reciever...lol...something to keep in mind is that the motor alone minus the water jacket sells for over $300! I'm pretty sure I had near or over $700 invested to initially set this boat up. It was gps'd at 48mph in oval trip on 12 3000nimh cells and a 645...add 4 or 5s lipo's and it'd be an instant saw boat! I guess I should stop writing as I'm realizing how much I liked this boat when I first built it...lol





    BJ 26, bought as a new bare hull, installed speedmaster hardware, neu 1515 and castle 120(motor and esc SOLD)...boat was run about 10 times, always on 12 cell packs, gps'd at 49mph with the neu and an x642, never tested bigger than that with current set up. The hull blew off the water on one of its last outings, and cracked the right front side of the hull, could easily be fixed with a strip of glass tape and resin. $160 plus shipping obo (hull and hardware)







    continued...
    Last edited by treystoys; 07-29-2010, 03:48 PM. Reason: new info
  • treystoys
    Senior Member
    • Oct 2007
    • 163

    #2
    Riggers...these were both scratch built by me, lite ply over balsa, the larger one is 25x15 and was run on 12 cells and a hacker b50 10L, small one is 21x13 1/2 and was run on 6 cells and a hacker b50 8S both have either fullers/speedmaster hardware and are sold w/o electronics $200 plus shipping for the large rigger, $150 plus shipping for the smaller one









    I also have an unfinished hull, a small scratch built mono, 20 1/2"x6" hull is complete, not sealed $80 plus shipping



    Thanks

    Trey
    Last edited by treystoys; 07-26-2010, 01:09 PM.

    Comment

    • bustitup
      Fast Electric Addict!
      • Aug 2008
      • 3071

      #3
      since you didnt post any prices I will give you $10 each for the hacker motors shipped
      SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
      EX President of the Offshore FE Vultures Society

      Comment

      • calcagno45
        Fast Electric Addict!
        • Mar 2008
        • 1006

        #4
        Interested in the H&M No-step2. How much local pick up?
        My prop hasn't been wet in a while.

        Comment

        • treystoys
          Senior Member
          • Oct 2007
          • 163

          #5
          Prices added, everything is open for offer of course.

          Thanks

          Trey

          Comment

          • bustitup
            Fast Electric Addict!
            • Aug 2008
            • 3071

            #6
            Originally posted by treystoys
            Prices added, everything is open for offer of course.

            Thanks

            Trey
            dont mind me man....I was just being a smart a$$ biotch
            SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
            EX President of the Offshore FE Vultures Society

            Comment

            • treystoys
              Senior Member
              • Oct 2007
              • 163

              #7
              No problem, I was trying to get the post done, adding pictures, taking pics out when I added to many, editing for prices, fixing my daughters breakfast at the same time trying to keep them from beating the crap outta each other...lol...so no worries!

              Trey

              Comment

              • Meniscus
                Refuse the box exists!
                • Jul 2008
                • 3225

                #8
                Trey,

                I'm interested in the 10L as long as the bearings are in good shape. I will check locally to see if someone wants another of the Hackers. Otherwise, I can offer $50 shipped for the 10L, no cooling.
                IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"

                MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil

                Comment

                • treystoys
                  Senior Member
                  • Oct 2007
                  • 163

                  #9
                  I'm gonna hold out for a while on the motors, I know the feigo motors are cheaper new, but I'm hopping to get nearer my asking price for the hackers, they are all in great condition with very little use.

                  Thanks

                  Trey

                  Comment

                  • Meniscus
                    Refuse the box exists!
                    • Jul 2008
                    • 3225

                    #10
                    You'll have to excuse my inappropriate offer. When I read your post quickly, I read it as the price together for two and missed the "each". LOL

                    Sorry about that! Seemed like a really good deal though! Ha
                    IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"

                    MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil

                    Comment

                    • Jesse J
                      scale FE racer
                      • Aug 2008
                      • 7116

                      #11
                      If Cory doesn't take the NS2, how much for just hull/hardware?
                      "Look good doin' it"
                      See the fleet

                      Comment

                      • calcagno45
                        Fast Electric Addict!
                        • Mar 2008
                        • 1006

                        #12
                        Have it Jesse...
                        My prop hasn't been wet in a while.

                        Comment

                        • treystoys
                          Senior Member
                          • Oct 2007
                          • 163

                          #13
                          You'll have to excuse my inappropriate offer. When I read your post quickly, I read it as the price together for two and missed the "each". LOL

                          Sorry about that! Seemed like a really good deal though! Ha
                          Lol...no man my apologies cause after your offer and my response I did a ninja edit...lol...I read over my post and was like yeah I see how that could look like both for the listed price! So I apologize...I'd go say $80 shipped w/o the jacket on the 10L as a one time forgive my ignorance deal...lol

                          Trey

                          Comment

                          • treystoys
                            Senior Member
                            • Oct 2007
                            • 163

                            #14
                            Not sure on the no step w/o hardware...maybe $175 plus shipping?

                            Let me know man

                            Trey

                            Comment

                            • carnalito
                              Member
                              • May 2010
                              • 99

                              #15
                              I'll take the 10l for 80 with jacket + shipping, send pp if interested. Tanks

                              Comment

                              Working...