200a Atlantis Waterproofing ESC

[FighterCat57]

This is a 200a "Flyermate Atlantis Waterproofing ESC" that I added a water cooling plate too. The water cooling plate is from an Aquastar 120. There is a proper heat transfer pad and copper heat sink in place. I sprayed it with acrylic conformal coating and shrink wrapped with a good thick shrink tubing.

I bought this as a temp ESC while waiting for the Hydra 240 to return to stock, but have decided not to use it.

I've only bench tested this ESC, it is brand new.

$75 Shipped USPS Small Flat Rate Box- International- Actual Shipping.

Enjoy!

[bustitup]

what was the mm on that heat shrink I want to order some

This is a 200a "Flyermate Atlantis Waterproofing ESC" that I added a water cooling plate too. The water cooling plate is from an Aquastar 120. There is a proper heat transfer pad and copper heat sink in place. I sprayed it with acrylic conformal coating and shrink wrapped with a good thick shrink tubing.

I bought this as a temp ESC while waiting for the Hydra 240 to return to stock, but have decided not to use it.

I've only bench tested this ESC, it is brand new.

$75 Shipped USPS Small Flat Rate Box- International- Actual Shipping.

Enjoy!

[FighterCat57]

what was the mm on that heat shrink I want to order some

It's 50mm. Very thick stuff.

[JMSCARD]

whats the specs on the esc? voltage capabilities?

[FighterCat57]

whats the specs on the esc? voltage capabilities?

Sorry; Looks like they are out of stock on their website, here's what I was given:

Type: Atlantis 200A-BEC
● Weight: 135g / 4.6 oz
● Size: 65 x 40 x 20 mm
● Constant Current: 200A
● Max Current: 230A (for ten seconds)
● SBEC: 4-7S, 5A
● Cut-off: 3.0V per cell for Lipo
● PWM: 8 Khz, 16Khz
● Input: 4 - 7S Lipo

[JMSCARD]

Thanks for the quick reply I am looking for 200 amp up to 8s controllers....

Sorry; Looks like they are out of stock on their website, here's what I was given:

Type: Atlantis 200A-BEC
● Weight: 135g / 4.6 oz
● Size: 65 x 40 x 20 mm
● Constant Current: 200A
● Max Current: 230A (for ten seconds)
● SBEC: 4-7S, 5A
● Cut-off: 3.0V per cell for Lipo
● PWM: 8 Khz, 16Khz
● Input: 4 - 7S Lipo

[FighterCat57]

Thanks for the quick reply I am looking for 200 amp up to 8s controllers....

I wouldn't run these on 8s, the fairchild MOSFETS are not rated past 30Vdc. I changed the listed specs to 7s because of that. They say 8s, but I don't trust it.

[jesflorida]

What is the method for programming the ESC?

Program card, beep beep,or ?

Thanks

jesflorida

[FighterCat57]

It's a beep setup as far as I know. I haven't changed any settings. Just plugged it in to make sure it would work. It calibrated to my Tx automatically. It makes the same sounds as the generic ESC's that came with the Genesis & Apparition. It didn't come with any instructions or paperwork.

[FighterCat57]

I was just informed that it is this model that has been water proofed: http://www.himodel.com/electric/HiMo...-200A-BEC.html

[Jesse J]

I will take this lil baby.

I think I will replace cooling plate, so if you could include a chunk of shrink wrap for when I add new cooling plate, I will be extra happy.

pm with paypal.

[FighterCat57]

I will take this lil baby.

I think I will replace cooling plate, so if you could include a chunk of shrink wrap for when I add new cooling plate, I will be extra happy.

pm with paypal.

Done. SOLD! (pending payment)

I'll toss in a foot of the shrink wrap for ya.

[Jesse J]

Sweet, thanks man. PP sent and the Hydro is happy!

cheers,
J

[FighterCat57]

Sweet, thanks man. PP sent and the Hydro is happy!

cheers,
J

Nice. Thanks! Just printed the shipping label, will go out with Monday's mail!

[Jesse J]

Sweet, thanks man.

I think you now need a Rio EP BLE...