Item has been traded - no longer for sale -- thanks
Note edits below in black, I didn't want to remove original post, but update with what I have done to make ARTR (just add rx and batts).
Here is my project that never took off. I got this on the forum a couple years ago and have not done much with it. I added a skid fin and reinforced its mount, but the rest is as I got it. I did create a new hatch (plexiglass and construction foam coated with West System Epoxy - to be finished by new owner) - it came with a tupperware lid as a hatch...
Hull has no damage, no cracks and looks to be repainted by previous owner. Finish is a nice matte, no scuffing needed.
Servo is GWS and works fine. Hardware is solid and allows for a 3/16" stub. CF motor mount is nice and angled just right.
All you see: $125 shipped ConUS
ADDED: note water pick up is in sponson. There is no flex shaft, coupler, prop or anything you don't see.
EDIT: I have since installed mystery 3000KV outrunner motor and 30A ESC (which I have waterproofed and cooled), added some stuffing tube to support flex cable, fixed flex shaft (new cable refitted in original 1/8" stepdown), and test drove it. I ran it on an X427 prop on 2S and it ran pretty good, on 3S or bigger prop and it will be the missile its legend describes.
Note edits below in black, I didn't want to remove original post, but update with what I have done to make ARTR (just add rx and batts).
Here is my project that never took off. I got this on the forum a couple years ago and have not done much with it. I added a skid fin and reinforced its mount, but the rest is as I got it. I did create a new hatch (plexiglass and construction foam coated with West System Epoxy - to be finished by new owner) - it came with a tupperware lid as a hatch...
Hull has no damage, no cracks and looks to be repainted by previous owner. Finish is a nice matte, no scuffing needed.
Servo is GWS and works fine. Hardware is solid and allows for a 3/16" stub. CF motor mount is nice and angled just right.
All you see: $125 shipped ConUS
ADDED: note water pick up is in sponson. There is no flex shaft, coupler, prop or anything you don't see.
EDIT: I have since installed mystery 3000KV outrunner motor and 30A ESC (which I have waterproofed and cooled), added some stuffing tube to support flex cable, fixed flex shaft (new cable refitted in original 1/8" stepdown), and test drove it. I ran it on an X427 prop on 2S and it ran pretty good, on 3S or bigger prop and it will be the missile its legend describes.
Comment