I hate sealing up a boat with tape. I also hate it when the boat flips and the tape peels off when you need it most. That why I built this boat. No taping needed. Just put batts in and tighten wing nuts on cover of the waterproof compartment. This is an Aeromarine Predator .21 30” fiberglass Tunnel Hull with a K&B SS leg with an adjustable Parther outboard mount. The hull is in great shape all nicks and scratches have been filled. Hull is wet sanded really well to 320 and ready for paint. The outboard leg is in great shape. A brass stuffing tube was added to outboard flex shaft to hold the Teflon liner but can be easily removed. Ever since I added this tube I have not broken a flex shaft. The steering is a pull/pull with digital metal gear servo. With the alum metal steering plate on the outboard it is really easy to remove motor and flex shaft for service and not have to mess with steering linkage. Their is plenty of room for batts. in the hull and adjusting COG. Plus boat is not top heavy because batts sit low in hull. This is a great set up and great boat and it drives like its on rails. Just add radio and power and hull and steering is ready to go.
Includes
Hull and Hatch and wood boat stand
K&B leg and mount (spare K&B parts) w/conversion spacer and coupling
Digital metal gear servo
Cooling plate for outrunner or inrunner set up
Receiver, batt. and esc is not included but was pictured to show set up.
$200 plus shipping and ins. USPS
(Box is 34”x 12” x 12” @ 9lbs shipped from St Louis MO 63125)
Pending
Includes
Hull and Hatch and wood boat stand
K&B leg and mount (spare K&B parts) w/conversion spacer and coupling
Digital metal gear servo
Cooling plate for outrunner or inrunner set up
Receiver, batt. and esc is not included but was pictured to show set up.
$200 plus shipping and ins. USPS
(Box is 34”x 12” x 12” @ 9lbs shipped from St Louis MO 63125)
Pending
Comment