Tweet
Hi everyone. I have an orange UL-1Superior that I bought last summer to run in a friend's pond behind his house. It's been run ~10 times in freshwater. I didn't get as hooked on boats as I have been for the last 20 years with airplanes so I thought I would sell the boat to help fund a Super Constellation project that I'm currently working on.
Here's a list of any warts I can see on it. I'm always very critical in my descriptions so I make sure potential buyers know everything about whatever I sell:
1. Turn Fin upgrade - Yes, I have been reading the Offshore electrics forums and saw that some people were having issues with the right sponson bulkhead cracking so I did the reinforcement upgrade and added a billet bracket with nylon shear screw just in case.
2. Discoloration on the nose is from the vinyl tape adhesive - can be cleaned off with alcohol. The canopy is new. I broke the original one on a foam "noodle" turn marker which made a scratch the bottom.
3.It had a small crack in the gelcoat on the bottom which I fixed with CA and 1/2 oz cloth for safe measure.You'll see it to the left of the scratch on the sponson.
4. The rear fin corner cracked when I was removing the fin from the boat . It has been glued back together. I only ran the boat without the fins - didn't want to loose them if the boat flipped (I never flipped it).
Paperwork, decals transmitter and stand are all included. I have the orginal box but it's a bit flimsy. I'll double box the boat to prevent damage.
$200 + shipping. I'll add a new Aquacraft Grimracer L40 X 57 3 blade prop which I've balanced and polished. Everything works as it should and has not been abused.
Please check out my ratings on RCGroups under the same handle "SRush99".
Thanks,
Stuart
Here's a list of any warts I can see on it. I'm always very critical in my descriptions so I make sure potential buyers know everything about whatever I sell:
1. Turn Fin upgrade - Yes, I have been reading the Offshore electrics forums and saw that some people were having issues with the right sponson bulkhead cracking so I did the reinforcement upgrade and added a billet bracket with nylon shear screw just in case.
2. Discoloration on the nose is from the vinyl tape adhesive - can be cleaned off with alcohol. The canopy is new. I broke the original one on a foam "noodle" turn marker which made a scratch the bottom.
3.It had a small crack in the gelcoat on the bottom which I fixed with CA and 1/2 oz cloth for safe measure.You'll see it to the left of the scratch on the sponson.
4. The rear fin corner cracked when I was removing the fin from the boat . It has been glued back together. I only ran the boat without the fins - didn't want to loose them if the boat flipped (I never flipped it).
Paperwork, decals transmitter and stand are all included. I have the orginal box but it's a bit flimsy. I'll double box the boat to prevent damage.
$200 + shipping. I'll add a new Aquacraft Grimracer L40 X 57 3 blade prop which I've balanced and polished. Everything works as it should and has not been abused.
Please check out my ratings on RCGroups under the same handle "SRush99".
Thanks,
Stuart
Comment