SV27 Supervee and parts For Sale

[Wake Maker]

Hello all,

I have my Supervee and some parts up for sale. Let me know what you need. I will ship same day as PayPal payment is recieved.

Yellow hull with, Aquacraft 1800kv motor, OSE trim tabs, custom handmade turnfins, modded radio box (no cover and trimmed), antenna mount and sealed hatch to make interior water sealed. Added foam noodles, scuffed ride pad, drilled rudder pickup, standard hardware, zpoxied inside, Futaba 3003 servo, stock esc, modded battery mounts with velcro. No prop or radio/reciever is included. Hull is in like new shape. No cracks in the paint or chips anywhere, looks great. I ran this with 2s1p's, Ammo motor and the 438 prop. It was a rocket!

Hull as described above with electrics and NO radio $110 ***SOLD***
Shaped and sharpened turn fins port and starboard $10 ***SOLD***
Sharpened balanced and polished props. Any $20
Grimracer 42x55 2 blade ***SOLD***
Grimracer 40x52 3 blade ***SOLD***
Octura 438 2 blade Dasboata ***SOLD***
Octura 537 3 blade Fine Design ***SOLD***
Futaba 2-PL FM radio with R153F reciever on channel 70. Like new. $50 ***SOLD***

***ALL ITEMS SOLD***

Thanks!

[Wake Maker]

Payment recieved and props are shipped. Thanks!

[fastbaltek]

12 shipped for turn fins? how long are they?

[Wake Maker]

fastbaltek, the measure a total depth of 1 7/8". They are the stock turn fins that have been shaped and sharpened. They have less drag in the water than the original square shape. The price is $12 for both plus shipping. Sending them USPS will be $5 pretty much anywhere in the US. Can't beat that price, one from Tower will cost $16.99. However please note it is for the turn fins only, no mounts, but you can cut a new mount from 90 degree stock from a hobby shop. Thanks!

[fastbaltek]

oh boo i would have totally bought them for 12 plus shipping. its the mounts i would need and i dont think i have the tools to do that sadly enough. but maybe ill see. so if you want to hold them for me. ill try to figure something out.

[Wake Maker]

The mounts are needed for whom ever buys the hull. However they can be made with a hack saw and a drill. Thanks again

[fastbaltek]

when did you purchase the boat? how many runs on the stock brushless?

[Wake Maker]

I've had the boat for a couple of months. Used in between my gas boats. Tried to get the guys in the club to try electric with no luck. The stock motor was only used for the first weekend. After that I bought an Ammo motor and had been running that with a CC 120 esc. The boat really s still in great shape. I hear about so many with cracks and damage but this one has none, still perfect. Plus all the good mods are done for you already. Just ad a reciever/radio and go fast.

[fastbaltek]

hmm... how much would shipping cost?

[Wake Maker]

$10 USPS Priority mail.

[Wake Maker]

All prices have been reduced! PayPal address is [email protected]

[Tunda]

How much for the radio?

[Wake Maker]

Hey Tundra, All the prices are listed after the description. The radio and receiver on ch. 70 is $50 plus $10 for shipping.

[fastbaltek]

i was looking over the pictures and i was wondering if the hatch locking was still on there? i didnt see it in the picture. did you buy it new or used? i think i may have to jump on this boat. :D

[Wake Maker]

I bought it new and did the mods myself. I did not like the idea of having the interior of the boat open to water if it flipped on the lake and getting on my batteries. I sealed the antenna hole and mounted it on the transom. The hatch lock would also let water in so I removed that as well. I use hatch tape to secure the cover now. Works much better and now everything is protected from water. You will also notice that since it is water tight now I also cut the radio box so working on radio/esc and coupler is much easier as well. Most of the FE boats are set up like this and is a better design. Let me know if you have any other questions and I will help any way I can.