H&M Maritimo set up for twin power.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fruity
    Senior Member
    • Jan 2009
    • 147

    #1

    H&M Maritimo set up for twin power.

    For Sale - Expressions of Interest-

    H&M Maritimo Hull & Hardware

    Hardware is Hopf german Hardware, with ball bearing struts.
    .150 L&R cables & Collets - Plus Spare Cables
    X442 L&R Octura Props - Professionally S&B
    Custom Aluminium Engine Mounts
    Push Pull Rudder System with Custom Servo Mount & Servo.
    Thru Hull Water pick ups, 1 for each side

    Good Clean Package ready to Paint / Decorate.

    Not Included - 9XL Motors & Jackets, 180amp Turnigy ESC's, Lipo's or Radio.

    I am happy to sell any of the not included items with the Hull & Hardware, but I am not parting this out unless someone takes the Hull first.

    I can sell it at any stage you require, from Hull & Hardware to RTR.

    Handles great, typical of the Maritimo Hull, I ran yesterday in choppy conditions and it eats it up. Only reason for sale is to fund the next project.....

    Ran at over 60mph in chop without a problem, has run65MPH in current set up, and still has plenty more with trimming etc.

    The small blue box on the back is where I place my Forerunner 101 GPS, it is bolted on through two small holes, which can be filled or just leave the Stainless Steel unbrako's in when removed.

    Any questions, please ask, more specific photo's etc.

    Asking $650 Australian + Postage.

    Cheers...Tim.
    Attached Files
  • Apples1
    Senior Member
    • Dec 2007
    • 406

    #2
    This is a steel guys, i have seen this boat and it flys, no expense spared, easilly a 70+mph setup IMO, It hasnt even had prop tuning done on it yet and its pulling 60+mph,
    returning to boats after a big break

    Comment

    • arrowskartax9
      Senior Member
      • Oct 2009
      • 130

      #3
      How much for complete rtr??
      Chris. Go Webber!!!!!

      Comment

      • arrowskartax9
        Senior Member
        • Oct 2009
        • 130

        #4
        Hi Tim, What is the length and width of this boat and does it come with the air scoop on the top of the cockpit and the twin scoops on the engine cover.
        Thanks, Chris.

        Comment

        • Fruity
          Senior Member
          • Jan 2009
          • 147

          #5
          Rtr

          RTR would be $1500

          Includes: Futaba 2PL 2.4 Gig Radio
          2 x 9xl Motors
          2 x 180 amp Turnigy ESC's
          4 x 5800mah 6s 30 C Zippy Flightmax Lipo's

          Cheers...Tim.

          Comment

          • Fruity
            Senior Member
            • Jan 2009
            • 147

            #6
            Chris,
            Length = Hull - 930mm, Overall = 1020mm, Width = 270mm

            Sorry forgot to add, I do not have any extra scoops

            Cheers..Tim.

            Comment

            • old guy
              Senior Member
              • Nov 2008
              • 687

              #7
              If you part it out I'm interested in props tingers and shafts
              Old GUy

              Comment

              • RIPFENCE
                Fast Electric Addict!
                • Sep 2009
                • 1332

                #8
                Wow amazing build...wish i had the funds for a twin cat build nice job fruity someone will be on cloud nine with that one
                "FE" STANDS FOR FRUSTRATING EXPLOSIONS

                Comment

                • HYDROJERRY
                  Fast Electric Addict!
                  • Jan 2010
                  • 2503

                  #9
                  Also if you part out i need a 9xl reeaalllyyy bad, please..

                  Comment

                  • jmeyer
                    Senior Member
                    • Jul 2008
                    • 138

                    #10
                    I am also interseted in a 9xl.

                    Comment

                    • Fruity
                      Senior Member
                      • Jan 2009
                      • 147

                      #11
                      Guys, I am comtemplating parting this out, only if I can get a decent offer on the Hopf hardware, which must go as a package, rudder, stingers, props, shafts & spare shafts.

                      Would be looking at $400 Aus for that lot + shipping.

                      I could also do the push pull steering & custom servo mount & steering servo, for a tiny bit extra.


                      Let me know if there is any interest.

                      Thanks...Tim.

                      Comment

                      • Fruity
                        Senior Member
                        • Jan 2009
                        • 147

                        #12
                        Still Available, any inererest / offers for complete or Parts considered.

                        Comment

                        • HYDROJERRY
                          Fast Electric Addict!
                          • Jan 2010
                          • 2503

                          #13
                          i no not offered but i could use one of the 9xl's...

                          Comment

                          Working...