Hyperion EOS 0610I Duo Dual Charger/Balancer

[daggersfl]

Here is a new EOS 0610I Duo Dual Charger/Balancer. I've had it a while, but never used it. Even the charge leads have the original plastic tie downs!

Specs:
Per Port:
- Lipo: 1S - 6S (3.7-22.2V)
- LiFe: 1S - 6S (3.3-19.8V)
- NiCd/NiMH: 1-16 Cells
- Lead Acid: 1-12 Cells


Dual Integrated LBA Balancers
Multi Adapters for Hyperion 2S to 6S packs included
Firmware Upgradeable
Temperature Sensor Ports
etc
etc.

Price is $175 shipped in continental USA

SOLD

[egneg]

Can I get adapters for align balance taps - if so I will take it.

[daggersfl]

Sorry I have no idea what those adapters are you are referring to.

[daggersfl]

If you could give me some idea, maybe I could look in the manual etc.

[egneg]

I have several lipo's with Align style taps - will the balance tap work. At RC Lipos they have the boards but the cables to connect them are out of stock. I would hate to have to get adapters for all the different cell counts.

[daggersfl]

Here is a picture of the leads and harnesses if it helps. Again, I'm sorry, but I don't know what Aligns are

[Diesel6401]

Can I get adapters for align balance taps - if so I will take it.

http://www.rcaccessory.com/hyperionbalanceharness2s-6s-xhconnector.aspx

[egneg]

Here is a link - scroll down to the section for Align taps.

http://www.rclipos.com/Accessories.htm#HPadp

[egneg]

http://www.rcaccessory.com/hyperionb...connector.aspx

But the connection cable is not included - that is the problem.

[daggersfl]

What is in the box looks like part # HP-LBA10-HP, but I'm guessing you want part # HP-LBA10-XH which is in stock and cost 2x $6.35 right? Let me know what you want to do

[old guy]

I will take it if egneg does not
old guy

[mappo]

I have several lipo's with Align style taps - will the balance tap work. At RC Lipos they have the boards but the cables to connect them are out of stock. I would hate to have to get adapters for all the different cell counts.

you ca buy a JST XH) tap that will work with Align batt. the hyperion taps will not work.

[egneg]

It looks like Steve has the proper stuff. PM me your paypal info and I will send payment tomorrow morning if that is ok.

[egneg]

Payment sent and all info is up to date - thanks.

[daggersfl]

Thanks for the payment. It'll go out on Monday!