Tweet
SOLD PENDING FUNDS
I have my last years Very competitive DF26 hull in nice warm orange. This colour is not easy to get anymore and there weren't many to begin with.
RTR!!!!
What it includes:
Hardware- Speedmaster rudder, HydroMarine Strut with Custom pure Teflon bushing/sleeve, This sleeve never seems to wear out. Shafts may over time but this has been great, not line lead teflon at all. It is drill like a Speedmaster sleeve with holes drilled in a a cross pattern, like S/M. Etti trim tabs ans Carbon turn fins.
This boat runs really great even in fairly harsh chop at our pond. The Homemade extensions for hardware work great and I have never touched this setup since I first dropped it in water. Video coming if John can getr uploaded...
I ran a Carbon 42mm most of the season in P-Spec offshore.
I ran it one day in P-mon fir giggles with a carbon 45mm prop UL-1 motor, Holy Crap!!!
It has nice water fittings.
Comes with Etti motor mount.
Octura 5mm - .150 Coupler
Hughey .150 Cable
Hitech MG225 Servo
Re-inforced with a layer of carbon Kevlar and also a layer of Kevlar, so the bottom is stiff and bullet-proof
No bind servo Linkage. Nice teflon coated brass linkage guide ( I was very anal building this)
Antennae tube.
Ubec,
RX Switch wire with deans micro plugs
Skywing 80 amp water cooled & Waterproofed (as good as a Castle or better that is) ESC with 5.5mm bullets and 3.5mm motor connectors
Turnigy Typhoon 500 motor, don't want to part with it but, if it helps the sale. It runs as powerful as a UL-1 maybe more? Test ran it last Sat. with K42 and runs great, like it had a UL-1 motor in it. Only 3 test runs.
I'll be getting more of these Typhoon motors...
Last a free K42mm prop like new.
Lowered to $250 shipped Conus/Canada
You would have to pay Johnny Cheung at least $220 + shipping for a white Knock off version that has a dinkey 28mm outrunner motor and esc but, what quality??
UL-1 package off the table, this boat is rtr, just add radio!!!!!
Remember I'm not asking for shipping....
I have my last years Very competitive DF26 hull in nice warm orange. This colour is not easy to get anymore and there weren't many to begin with.
RTR!!!!
What it includes:
Hardware- Speedmaster rudder, HydroMarine Strut with Custom pure Teflon bushing/sleeve, This sleeve never seems to wear out. Shafts may over time but this has been great, not line lead teflon at all. It is drill like a Speedmaster sleeve with holes drilled in a a cross pattern, like S/M. Etti trim tabs ans Carbon turn fins.
This boat runs really great even in fairly harsh chop at our pond. The Homemade extensions for hardware work great and I have never touched this setup since I first dropped it in water. Video coming if John can getr uploaded...
I ran a Carbon 42mm most of the season in P-Spec offshore.
I ran it one day in P-mon fir giggles with a carbon 45mm prop UL-1 motor, Holy Crap!!!
It has nice water fittings.
Comes with Etti motor mount.
Octura 5mm - .150 Coupler
Hughey .150 Cable
Hitech MG225 Servo
Re-inforced with a layer of carbon Kevlar and also a layer of Kevlar, so the bottom is stiff and bullet-proof
No bind servo Linkage. Nice teflon coated brass linkage guide ( I was very anal building this)
Antennae tube.
Ubec,
RX Switch wire with deans micro plugs
Skywing 80 amp water cooled & Waterproofed (as good as a Castle or better that is) ESC with 5.5mm bullets and 3.5mm motor connectors
Turnigy Typhoon 500 motor, don't want to part with it but, if it helps the sale. It runs as powerful as a UL-1 maybe more? Test ran it last Sat. with K42 and runs great, like it had a UL-1 motor in it. Only 3 test runs.
I'll be getting more of these Typhoon motors...
Last a free K42mm prop like new.
Lowered to $250 shipped Conus/Canada
You would have to pay Johnny Cheung at least $220 + shipping for a white Knock off version that has a dinkey 28mm outrunner motor and esc but, what quality??
UL-1 package off the table, this boat is rtr, just add radio!!!!!
Remember I'm not asking for shipping....
Nortavlag Bulc 
Comment