Tweet
Here is my E-Revo that I bought as a normal E-revo and upgraded it with the Mamba Monster 2200KV system....
I also Installed the 17mm blue anodized wheel hexes...
Has 3 Raceday old AKA Truggy Wheels/Tires with alot of life left...
Has a Beat up alluminum Integy Wheely bar that the rubber tires are missing from... the alluminum wheels are still intact and the wheely bar still works really well for what its intended to do....
Also has Integy MSR5 Resevoir Shocks and Mounts... A couple of the shafts for the shocks have a slight bend as using the long travel suspension slightly over "stretches" them.... but they still work GREAT.. and have never bound up or caused any problems.... !!!
I also have some extra NEW drive shafts and a few other stock E-REVO parts for replacement stuff.. etc....
I have a Lexan (paint) matched Cover double sided taped over the second hole of the motor mount where the titan motor used to be.....
This stock (2) motor mount works great for this setup though..... so I never bothered changing it for the single motor mount.....
This thing is amazing both on the ground and in the air!!!!
This thing will out jump ANYTHING.... absolutely awesome....cleared every double on our track with ease..... if we had a triple it would have cleared that too!
I seriously NEVER lost a race (heat or main) with this truck... they let me run in the unlimited monster truck class with this truck and it totally blew away the competition..... in fact I ran around the track with lap times that were equivelant with the PRO B main Truggys..... it was so fast that they told me I was gonna have to run Truggys so I stopped running it..... If I can play in the A mains I don't wanna play
I ran the truggy on 6s and 4s ..... it is setup right now how I raced it.... on 6s, it was ballastic and I have it geared down to keep the heat down and to top out at about 43-45mph.... plenty fast for racing and unreal torque:)
It has the typical wear and could use a good cleaning.... I would say total it has about 20-30 total runs on it.....
I am into R/C boats and would take a nice one in trade... hydros, monos, lipos, high mah C rating ones:) matching sets...
I am selling less radio.... The DX2.0 I used is not included.... and I cant currently find the little plastic cover that covered the reciever from water... I never used it ..... and took it off when I put the sr3000 2.4ghz reciever in.... which, again the reciever is not included...
I do have the orginal body which is still in decent shape... scratched up but useable....
I can get better pics... these pics are the way it sits now.... dirty after my last race last season.......
$500 plus shipping which will be actual cost.... shouldn't be bad at all....
I also Installed the 17mm blue anodized wheel hexes...
Has 3 Raceday old AKA Truggy Wheels/Tires with alot of life left...
Has a Beat up alluminum Integy Wheely bar that the rubber tires are missing from... the alluminum wheels are still intact and the wheely bar still works really well for what its intended to do....
Also has Integy MSR5 Resevoir Shocks and Mounts... A couple of the shafts for the shocks have a slight bend as using the long travel suspension slightly over "stretches" them.... but they still work GREAT.. and have never bound up or caused any problems.... !!!
I also have some extra NEW drive shafts and a few other stock E-REVO parts for replacement stuff.. etc....
I have a Lexan (paint) matched Cover double sided taped over the second hole of the motor mount where the titan motor used to be.....
This stock (2) motor mount works great for this setup though..... so I never bothered changing it for the single motor mount.....
This thing is amazing both on the ground and in the air!!!!
This thing will out jump ANYTHING.... absolutely awesome....cleared every double on our track with ease..... if we had a triple it would have cleared that too!
I seriously NEVER lost a race (heat or main) with this truck... they let me run in the unlimited monster truck class with this truck and it totally blew away the competition..... in fact I ran around the track with lap times that were equivelant with the PRO B main Truggys..... it was so fast that they told me I was gonna have to run Truggys so I stopped running it..... If I can play in the A mains I don't wanna play
I ran the truggy on 6s and 4s ..... it is setup right now how I raced it.... on 6s, it was ballastic and I have it geared down to keep the heat down and to top out at about 43-45mph.... plenty fast for racing and unreal torque:)
It has the typical wear and could use a good cleaning.... I would say total it has about 20-30 total runs on it.....
I am into R/C boats and would take a nice one in trade... hydros, monos, lipos, high mah C rating ones:) matching sets...
I am selling less radio.... The DX2.0 I used is not included.... and I cant currently find the little plastic cover that covered the reciever from water... I never used it ..... and took it off when I put the sr3000 2.4ghz reciever in.... which, again the reciever is not included...
I do have the orginal body which is still in decent shape... scratched up but useable....
I can get better pics... these pics are the way it sits now.... dirty after my last race last season.......
$500 plus shipping which will be actual cost.... shouldn't be bad at all....