The not for me right now for sale thread

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lsone
    Member
    • Aug 2008
    • 48

    #1

    The not for me right now for sale thread

    Hey guys/gals. Hate to do this however I have to focus on other things. I do not have the time nor money to finish this, plus I found some cracks in the hull and have zero desire in fixing it.


    1st: Selling all of the boat hardware together. Rudder w/ single water pick up, turn fins, double wide trim tabs and stinger strut. On OSE it comes to around 130 when I did the shopping cart thing last night. Sell it for 100obo plus the ride.

    2nd: Peter Zicha did up a bad ass motor mount for a deep vee aswell. Not looking to make money, looking to get my money back. I had this motor mount setup so I could run 580 fiago, Neu 1515, Neu 1521 and Neu 1527. All with ESC mounts and different parts to make the mount accordingly. This is a pimp mount and leaves a guy wide open with the ability to run whatever motor he really wants.(within reason) Sell this for 100 plus the ride.

    3rd: Next up is a 200 amp himodel esc custom watercooled by Peter Zicha. The esc has 5.5 mm bullets and 10 guage wires on motor and battery sides and was totally waterproofed by Peter aswell. This is the Opto version and is 7s. Sell for 100 plus the ride.

    I'll throw it all inside the 32" hull for 350 shipped to the USA.


    Here are some pics of it all.











    -Matt
    Last edited by lsone; 02-21-2010, 02:51 PM.
  • ace028
    Senior Member
    • Aug 2007
    • 952

    #2
    how fast will it go with that nice turbo there? lol.

    Hope your stuff sells, looks nice!
    Twin power =

    Comment

    • LiPo Power
      DJI Drone Advanced Pilot
      • May 2009
      • 3186

      #3
      is this the only spot with cracks?
      DJI Drone Advanced Pilot
      Canada

      Comment

      • lsone
        Member
        • Aug 2008
        • 48

        #4
        Originally posted by ace028
        how fast will it go with that nice turbo there? lol.

        Hope your stuff sells, looks nice!
        Thats why it is going to be honest. I'm upgrading from a single 76mm turbo to twin 67mm billet units. Its my main hobby and my focus as of right now.

        Thanks for the kind words!

        Comment

        • lsone
          Member
          • Aug 2008
          • 48

          #5
          Originally posted by LiPo Power
          is this the only spot with cracks?
          yes sir

          Comment

          • HYDROJERRY
            Fast Electric Addict!
            • Jan 2010
            • 2503

            #6
            just gotta ask what are you putting (twin turbos) in,thats alot of boost...

            Comment

            • 6S HYDRO
              Fast Electric Addict!
              • Mar 2009
              • 1320

              #7
              God i love boost, yeah what r they goin in?

              Comment

              • lsone
                Member
                • Aug 2008
                • 48

                #8
                They are going into my 72 Chevelle. It was originally built for corners. All 1 off suspension in the front end. Custom 7075 billet race hubs, C6 Z06 Corvette brakes all around. 14" 6 piston fronts, 13" 4 piston rears. All adjustable control arms, QA1 race heims all around. Built 12 bolt. GM LS1 364ci. 4l80e manually shifted.

                Last 2 years the car ran on a single 76mm turbo kit I built. Car made 650rwhp on 8-9lbs of boost. Stock 25,000km long block. Comp turbo cam, pushrods, springs, arp hardware, injectors, speed density tune and some other minor things. The car went 11.2@130mph last year with a 2.0 60 foot time. Bone stock truck transmission and torque converter. That was on 8lbs of boost. I had wastegate issues. Usually the car sees 14-15lbs of boost on the street.

                Over winter I'm doing a twin setup for the fun of it. Built 4l80e tranny. 3800-4000 stall. 15" double beadlocks, 4130 chromoly 10 point cage, yada yada. The car is a grudge racer/heads up style car. However I build it for myself and to please myself only. If other people dig it, right on :)

                Precision billet wheel 67mm turbos. New Tial mvs wastegates and new Tial Q bov.


                The car


                Some of the front suspension. Custom spindles and hubs, coilovers, adjustable uppers and lowers, etc etc.


                During the build


                As I took it off and sold it.


                Now lets sell some boat parts!!! This will fund my anti roll bar in the rear!

                Comment

                • 6S HYDRO
                  Fast Electric Addict!
                  • Mar 2009
                  • 1320

                  #9
                  those tial wastegates are the *!***!***!***!**

                  Comment

                  • lsone
                    Member
                    • Aug 2008
                    • 48

                    #10
                    Originally posted by 6S HYDRO
                    those tial wastegates are the *!***!***!***!**
                    yes sir. Small compact size. V band so just slam a v band ring on the pipe and done. Clock them whatever way you need them to face, several ports to use. I was stoked when they released them.

                    Comment

                    • 6S HYDRO
                      Fast Electric Addict!
                      • Mar 2009
                      • 1320

                      #11
                      had an earlier one one my civic turbo

                      Comment

                      • Eodman
                        Fast Electric Addict!
                        • Sep 2007
                        • 1253

                        #12
                        Nice car! The first trime I got out of the Marine Corps I bought a 70 Chevelle SS from Baldwin Motion out on Long Island --- Phase III and it had a 396 425hp under the hood and I'm here to tell you it went like stink!

                        Of all my cars (I've had a lot) the Chevelle was my absolute favorite! Although my 2 TR6's aren't far behind!
                        We did it with a Bang!

                        Cats Are Where It's At!

                        Comment

                        • HYDROJERRY
                          Fast Electric Addict!
                          • Jan 2010
                          • 2503

                          #13
                          i had a 72'' i got for $1,000 body was pirfect all original SS metalic blue with silver racing stipes, even the rear end said SS,no motor or trans when bought it, order a 454 crate motor had a freind bor it to, i think it was 505, all edlbrock aluminum parts and a holly 750 carb but never got to run it ....didnt finish and sold for 9,000....

                          Comment

                          • lsone
                            Member
                            • Aug 2008
                            • 48

                            #14
                            lol bummer about not even getting to enjoy it. Thanks for the comments guys! It is a fun hobby.

                            Make offers. I need this stuff gone.

                            Comment

                            • lectriglide
                              Senior Member
                              • Nov 2009
                              • 538

                              #15
                              UUUhhh, talk about a wolf in sheep's clothing!

                              Comment

                              Working...