FS Speedos and props

[m4a1usr]

Getting rid of some goodies that I do not use anymore. Prices include shipping to the lower 48. Anywhere else I will need extra bux.

This is a Hextronic 120 speedo with custom water cooling plates added and sealed in 3M electronics epoxy. It is definately waterproof. Has 4mm bullets and deans. Used for a couple runs in an SV27 and settled on a BK warrior instead due to size. Works great. $50


Next is a Mystery 80amp speedo. Again with a custom water plate and barbed water connectors. These are darn good speedos! Sealed in 3M electronics epoxy and waterproof. $40


I'm selling some big props too. They are all sharpened/balanced and polished. I dont plan on running any hulls needing props this size so out of the prop box they go. There is a 1462 (far right prop) then a 1460 (middle) and then a 457 (left). Been in the water and work perfectly. They are still bright and look very nice. $25 each.



Last two props are both the same size but one with mods. Both are X455's but the one on the right has been slightly detongued. $25 each again.



I'm going to list some more props soon as I clear out the straglers.

John

[Jesse J]

for each speedo, how many volts and do you need pistix?

[m4a1usr]

I needed a pistix for both of them. I am using a Futaba 3PDF and a 3PM system. The Mystery 80 is rated 3 to 5S and the Hextronic is 2 to 6S. I ran the Mystery on 14 cells nimh an the Hxt 120 on 4S.


John

[mpg43]

Payment sent.

Thanks,
Mark