Custom Picklefork Hull U Finish

[Hydromaniac]

I have way too many projects going and need to move some things. This hull began as a Classic hydro LSH, It has been raced a few times, then I took it apart and Modified it to an early Pickle fork as I found the hull was faster and more stable when modified like this. After changing the nose I blueprinted the entire hull and block sanded then sprayed 3 coats of automotive primer. The hull only needs final sand and paint to your choice as you want. It has the motor mount, stuffing tube and flotation installed. It comes with a new cowl /hatch that you need to trim and fit, The cowl can be done open or closed hood your choice hood and dummy "scale" motor pieces also included. This sale is for everything you see in the pictures. $70.00 OBO shipped CON.U.S.

[mpg43]

I am interested. How long is the hull Is it all glass except for the cowl?

[Hydromaniac]

23 3/4 long It Is ABS but has been completely reenforced with 1/32 ply (see Floor In the pics) They are very strong this way. It is all backed and stiff. I have had great luck with this and have survived several crashes with other hulls done this way that would have killed a lite lay FE glass hull.

[mpg43]

I was looking for a little longer hull, About 26" or so. Well thank you anyway.
Thanks,
Mark

[Hydromaniac]

I was looking for a little longer hull, About 26" or so. Well thank you anyway.
Thanks,
Mark

I could build one to any size you want.

[ppabalan]

i'll get it is it still avavilable?
PM me please thanks

[Hydromaniac]

PM sent