Tweet
I have 3 boats for sale here:
The White One - Delta Force 26 Clone. Near mint condition (odd handling scratch ... no damage), excellent build with blueprinted hull, carbon fiber transom, rails, and bits (no wood in this boat). All Fine Design and Etti Hardware (matching Chrome and Purple). Wire drive. Run as a N2 with a 1515 1D (53mph in race trim), or could be run as a LSO as well. Premium Build. You will not find a better boat.
*** Boat, Hardware, Wiredrive, New HiTec Servo. RTR, less motor, esc, rx, and prop. $200 + Shipping. (Can add a lightly used Sv27 motor if buyer wants for $40 more)
The Black One - Promise 25. Near mint condition (odd handling scratch ... no damage), excellent build with blueprinted hull, blue carbon fiber bits (it all matches ... pretty boat). All Fine Design and Etti Hardware. Wire drive. Was going to be my N2 mono for this year, but I am running too many classes. Permium Build. You will not find a better boat.
*** Boat, Hardware, Wiredrive, New Servo. RTR, less motor, esc, rx, and prop. $200 + Shipping. (Can add a lightly used Sv27 motor if buyer wants for $40 more)
OPC P-Spec Hull: Graupner F1 Fiberglass Hull. Essentially new. The boat was rigged, tested, setup, and has sat since. REK leg, HiJack mount, New K&B propshaft and flex, New Jr Metal Gear Servo, SV27 with about 10 runs on it ... never hot. Boat is fast. Runs 43+mph with a simple M445 setup. Permium Build. You will not find a better boat. I have 3 other OPC boats besides this one.
*** Boat, Hardware, SV27 Motor ... everything less Prop, ESC, and RX $325+Shipping.
Can also supply some lightly used Enerland Lipos if needed for any of the boats.
Please PM me your email for more pics.
TRADES ... maybe. Interested in maybe a 1/8 Buggy or Truck (brushless only) or vintage Team Associated Stuff.
Here you go ...
Etti Motor Mount, HiTec MG servo, all matching purple/silver hardware. Every nut and bolt is stainless.
Second pic is of the transom pre-decal job.
The White One - Delta Force 26 Clone. Near mint condition (odd handling scratch ... no damage), excellent build with blueprinted hull, carbon fiber transom, rails, and bits (no wood in this boat). All Fine Design and Etti Hardware (matching Chrome and Purple). Wire drive. Run as a N2 with a 1515 1D (53mph in race trim), or could be run as a LSO as well. Premium Build. You will not find a better boat.
*** Boat, Hardware, Wiredrive, New HiTec Servo. RTR, less motor, esc, rx, and prop. $200 + Shipping. (Can add a lightly used Sv27 motor if buyer wants for $40 more)
The Black One - Promise 25. Near mint condition (odd handling scratch ... no damage), excellent build with blueprinted hull, blue carbon fiber bits (it all matches ... pretty boat). All Fine Design and Etti Hardware. Wire drive. Was going to be my N2 mono for this year, but I am running too many classes. Permium Build. You will not find a better boat.
*** Boat, Hardware, Wiredrive, New Servo. RTR, less motor, esc, rx, and prop. $200 + Shipping. (Can add a lightly used Sv27 motor if buyer wants for $40 more)
OPC P-Spec Hull: Graupner F1 Fiberglass Hull. Essentially new. The boat was rigged, tested, setup, and has sat since. REK leg, HiJack mount, New K&B propshaft and flex, New Jr Metal Gear Servo, SV27 with about 10 runs on it ... never hot. Boat is fast. Runs 43+mph with a simple M445 setup. Permium Build. You will not find a better boat. I have 3 other OPC boats besides this one.
*** Boat, Hardware, SV27 Motor ... everything less Prop, ESC, and RX $325+Shipping.
Can also supply some lightly used Enerland Lipos if needed for any of the boats.
Please PM me your email for more pics.
TRADES ... maybe. Interested in maybe a 1/8 Buggy or Truck (brushless only) or vintage Team Associated Stuff.
Here you go ...
Etti Motor Mount, HiTec MG servo, all matching purple/silver hardware. Every nut and bolt is stainless.
Second pic is of the transom pre-decal job.
Comment