UL-1 hull and hardware
Collapse
X
-
ok I will take a good picture for you but when I bought the boat I was told the turn fin area was not damaged at all....and it probably wasn't because i trust the member here but I have to say it was packaged very loosely and probably hit the turn fin and slightly broke the fiberglass where the turn fin bolts to the hull.......the fin is still bolted on the glass but moves a little bit....you could not run it like this would unbolt the bracket off of the boat and take a small piece of plywood (like 1/8" and bond it to the hull...then lay a layer of either glass or CF over it ......let dry and bolt the fin back on...I will include a small piece of cf to cover it
probably a couple hours of labor not counting drying time
the boat has no scratches or blemishes on the outside and the inside has a smoke stain on the lid from a burnt esc but will clean up with denatured achohol or oven cleaner
boat is worth $100 easySPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures SocietyComment
-
here is the crack...its an easy fix
the discoloration you see is from the camera flash....this boat is as red as a fire truck and no scratches or scrapes
guy from australia is very interested......first one to say they want..... it its theres
SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures SocietyComment
-
-
yes aftermarket strut and it doesnt look like the tube was cut back at all...again the orange bloches are camera flash...this hull looks awesome
also you can see the homemade air damm that is easily removable
SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures SocietyComment
-
Comment
-
Comment
Comment