Are you building a twin engine cat?

[bustitup]

take these both for $50 shipped in the USA... insurance would be extra



Here is what they look like mounted

[steveo]

thinking about it, they have the bearings

[Diegoboy]

Are the base plates stock (with the angle to comp for prop walk) or modded (0º flat for counter-rotating twin application)?

[bustitup]

yes the brass bushings are included

diego I bought the martimo as you see it and they are not modded they are stock

the ones for sale are on the top picture with brass bushings included...i dnt need them anymore because the martimo I bought in the bottom two pictures came with the stingers that you see on it

I will take the ones off the Martimo and mill them flat because they lean to the starboard side I couple degrees

for $50 its a nice alternative to having to pay $200 to $300 or more for new drives

first to say I take it...... gets it

paypal is [email protected]

[bustitup]

thinking about it, they have the bearings

I just noticed you are in WPB so am I

I could meet you and deliver

[Jeff Wohlt]

They are too small for 5/16 x 3/16 id" bearings but they can use 4mm bearings ok. Then shim up for 3/16" props. Problem is a 130 flex is about all you can fit in the stub....or the 78 wire is easy.

Yes, you must file them flat as they do have angle in the for torque. There are plenty of good stinger out there but they are metic....not a big issue to convert

[bustitup]

There are plenty of good stinger out there but they are metic....not a big issue to convert

Show me the cheapest stinger that will let you run .150 flex with 3/16" prop shaft

[Brushless55]

are these the stock sv drives?

[bustitup]

are these the stock sv drives?

Yes

[bustitup]

Ok take them for $40 shipped usa

[Jeff Wohlt]

I think you are looking at them...SV stingers are cheapest.

The others just need the bushing taken out and a new non-metric bushing put in...and may have to be drilled slightly but that can be done at home with a drill.

Why not use just struts on it? No problem with that. Stingers are not the hot set up...just scale looking. Struts can be adjusted up and down and angled....stingers can't.

[bustitup]

ttt..........

[bustitup]

some has to need these..last drop

$35

[egneg]

I will take them if that is $35 shipped.

[bustitup]

I will take them if that is $35 shipped.

Pp is [email protected]