NEEDED! Kyosho Mini Z Props or any small props

[Meniscus]

I need a very, very small prop for a project I'm working on. The props that go on the Kyosho Mini Z would be perfect, but OSE doesn't have them in stock.



If you have one of these props, plastic is fine, or a prop of a similar size, PLEASE LET ME KNOW!

I really appreciate it!

Also, if you happen to have an old beat up Kyosho Mini Z sitting around, I may be interested as well.

Thanks!

[bustitup]

how many mm we talking here?...around 32-36?...I might have one or two

I need a very, very small prop for a project I'm working on. The props that go on the Kyosho Mini Z would be perfect, but OSE doesn't have them in stock.



If you have one of these props, plastic is fine, or a prop of a similar size, PLEASE LET ME KNOW!

I really appreciate it!

Also, if you happen to have an old beat up Kyosho Mini Z sitting around, I may be interested as well.

Thanks!

[Meniscus]

LOL, I'm thinking 15-20mm range but I'm not sure what size the kyosho's are.

[rcjrboatman]

Tower Hobbies has some small props like this:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMNM6&P=7

[Meniscus]

Tower Hobbies has some small props like this:
http://www3.towerhobbies.com/cgi-bin...?&I=LXMNM6&P=7

I appreciate the input. This link is for props that measure 25.4mm. I'll keep this in mind, but I really need something a little smaller.

[6S HYDRO]

why dont you just order from kyosho usa, or just google mini-z prop

[6S HYDRO]

also you can get a store model hull of these off kyosho usa for like 45.00. no motor esc- micro brushless ready

[NativePaul]

I'll be watching this thread, I have a small boat with a high revving setup that calls for very small props, I'm currently cutting down X427s but under about 24mm they seem to have lost their shape too much and don't work well.

[Meniscus]

Kyosho is currently saying they don't have in stock, unless I it's bundled with one of their boats. That's a great deal more money than I'm looking to spend to get a hold of these small props.

I don't know where to start to find the aforementioned store model hull.

Paul, I will definitely let you know if I end up finding some small ones. I know that there was talk about some smaller props coming out of Japan in the future, but to my knowledge it's only talk and hasn't been corroborated. I was wondering to myself, what about the old TFL props and wondering if there were any very small ones that they made in the past.

Keep the input coming. I appreciate it.

[6S HYDRO]

found the link to the display models

http://www.shopkyosho.com/products/category/410.0.1.1.25376.0.0.0.0

i will be picking one of these up

[6S HYDRO]

here the props they can be backordered it says

http://www.shopkyosho.com/products/productdetail/PROPELLER+SET+(MINI-Z+FORMULA+BOAT)/part_number=BMW02/410.0.1.1.25387.25418.25422.0.0?

[Meniscus]

Thanks for the info Paul. It looks like that is what I'm going to have to do.

[Jesse J]

Ben, what size shaft are you using? I have a bunch of lil guys and will have to see if they are the shaft size you want. I have a couple 4mm threaded guys too.

15-20 mm? eek, I will check to see what I have.

[Meniscus]

I haven't defined the shaft size yet. This project is still in the building stage. I was actually going to use a shaft that fit whatever small props I could find. So, basically I'm looking for ANY small prop.

I appreciate you looking through your stuff for me!