Tweet
Putting my boat up for sale, been building 2 other boats for awhile, both are almost ready to hit the water.
Supervee has got to go, just dont run it much anymore at all.
Boat is used, has plenty of runs on it.
It is still in real good shape.
Has cracks along both sides of the hull.
They are not serious, Supervee's are known for these cracks.
there is a chip in the gel coat on the bottom of the boat towards the back.
it is not serious at all, i have filled it in with CA glue. It is fine.
Boat has OSE trim tabs and Fullers water pick up.
Rudder, Rudder bracket, trim tabs, and the strut have all been polished.
The prop is a sharpened, balanced and polished Octura X642 prop. It is nearly new and looks brand new.
Boat is fitted with a bullet prop nut as well.
Comes with a OSE turn fin, no turn fin on the port side.
Boat does have 2 water pick-ups.
Hatch latch has been removed.
Bow is stuffed with foam noodle.
I made my own platforms for the batteries to be Velcro'd down to.
All wood has been sealed, velcro has been added.
Radio box has been removed, made my own radio tray.
Foam noodle was added to the hatch as well.
This boat runs very well!
Never was able to get a GPS in the boat, but no doubt does it do mid 50's.
Plenty of videos of this boat are on youtube.
Electronics-
Feigao 8xl with 5.5 mm bullets
Seaking 180 amp controller with 5.5mm bullets
Futaba MG servo
JR xr2i radio
Boat comes with a PVC stand as well as the stock Aquacraft stand.
I am also including a container of Grim's Speed grease, a P220 prop, lead weight, a brand new Flex cable with prop shaft, extra teflon lining, 2 nearly new JR z590 MG servos, Ofna temp gun, 2 rolls of hatch tape and a bunch of random lengths of water cooling line.
I may have more extras laying around, if i do, i will throw them in as well.
I can include 1 or 2 pairs of 8 cell packs, but not for free.
Let me know if your interested in batteries.
$250 shipped for the boat the way it sits in the pictures with everything listed above besides the batteries which will be extra.
Supervee has got to go, just dont run it much anymore at all.
Boat is used, has plenty of runs on it.
It is still in real good shape.
Has cracks along both sides of the hull.
They are not serious, Supervee's are known for these cracks.
there is a chip in the gel coat on the bottom of the boat towards the back.
it is not serious at all, i have filled it in with CA glue. It is fine.
Boat has OSE trim tabs and Fullers water pick up.
Rudder, Rudder bracket, trim tabs, and the strut have all been polished.
The prop is a sharpened, balanced and polished Octura X642 prop. It is nearly new and looks brand new.
Boat is fitted with a bullet prop nut as well.
Comes with a OSE turn fin, no turn fin on the port side.
Boat does have 2 water pick-ups.
Hatch latch has been removed.
Bow is stuffed with foam noodle.
I made my own platforms for the batteries to be Velcro'd down to.
All wood has been sealed, velcro has been added.
Radio box has been removed, made my own radio tray.
Foam noodle was added to the hatch as well.
This boat runs very well!
Never was able to get a GPS in the boat, but no doubt does it do mid 50's.
Plenty of videos of this boat are on youtube.
Electronics-
Feigao 8xl with 5.5 mm bullets
Seaking 180 amp controller with 5.5mm bullets
Futaba MG servo
JR xr2i radio
Boat comes with a PVC stand as well as the stock Aquacraft stand.
I am also including a container of Grim's Speed grease, a P220 prop, lead weight, a brand new Flex cable with prop shaft, extra teflon lining, 2 nearly new JR z590 MG servos, Ofna temp gun, 2 rolls of hatch tape and a bunch of random lengths of water cooling line.
I may have more extras laying around, if i do, i will throw them in as well.
I can include 1 or 2 pairs of 8 cell packs, but not for free.
Let me know if your interested in batteries.
$250 shipped for the boat the way it sits in the pictures with everything listed above besides the batteries which will be extra.
Comment