Tweet
Hello All,
More items to clear out of the shop. I have new 3 TFL hobby built 25 vee hulls that will look familiar to most of you. These have been called RC Prince, etc.. Again, these come direct from TFL hobby and are in as new condition with hardware installed. One differentiating factor is that these hulls have the carbon fiber look windshield (vinyl) which looks awesome.
NOTE: The white hull and yellow hull have hatches that do not fit perfectly. They fit good with tape, but do not set flush in the hull. The red hull has a perfect hatch fit to the hull.
Each has the wood inserts installed for the motor mount, battery mount and servo mount. The area for the battery mount works very well for the esc mount also....whatever your preference is for the build.
Some tech details:
4mm flex and 4mm prop shaft installed with prop. Rudder mount installed, rudder not mounted (see pics) Has aluminum antenna mount. Aluminum water outlet. Water lines run extra piece cut. Steering linkage with boot installed (time saver)
Cost: $95 shipped for the yellow or white hull. This is due to the imperfect hatch fit. NOTE: White hull comes with my logo (schweet) and a 4mm turnigy prop upgrade. Red hull is $100 shipped, it is the best fit and finish. Price does not include insurance and these shipments will be by UPS ground. If you wish to have the shipment insured, please let me know and cost will be added.
I do have 3300kv water jacket motors (new) A very hot powerplant for the build. Limits are 3s for good long runs. 4s for short. An absolute rocket on 4s, but builds the heat very quickly. Also have the couplers for the 4mm flex in the shop if you need one.
Lets talk.........
All the best! Scotty
More items to clear out of the shop. I have new 3 TFL hobby built 25 vee hulls that will look familiar to most of you. These have been called RC Prince, etc.. Again, these come direct from TFL hobby and are in as new condition with hardware installed. One differentiating factor is that these hulls have the carbon fiber look windshield (vinyl) which looks awesome.
NOTE: The white hull and yellow hull have hatches that do not fit perfectly. They fit good with tape, but do not set flush in the hull. The red hull has a perfect hatch fit to the hull.
Each has the wood inserts installed for the motor mount, battery mount and servo mount. The area for the battery mount works very well for the esc mount also....whatever your preference is for the build.
Some tech details:
4mm flex and 4mm prop shaft installed with prop. Rudder mount installed, rudder not mounted (see pics) Has aluminum antenna mount. Aluminum water outlet. Water lines run extra piece cut. Steering linkage with boot installed (time saver)
Cost: $95 shipped for the yellow or white hull. This is due to the imperfect hatch fit. NOTE: White hull comes with my logo (schweet) and a 4mm turnigy prop upgrade. Red hull is $100 shipped, it is the best fit and finish. Price does not include insurance and these shipments will be by UPS ground. If you wish to have the shipment insured, please let me know and cost will be added.
I do have 3300kv water jacket motors (new) A very hot powerplant for the build. Limits are 3s for good long runs. 4s for short. An absolute rocket on 4s, but builds the heat very quickly. Also have the couplers for the 4mm flex in the shop if you need one.
Lets talk.........
All the best! Scotty
Comment