Tweet
i just bought a feigao 8xl for my hotr 32" cat and i need the coupler for it. im not sure what the shaft size is on the feigao... but i do know my flex shaft is a 4mm which if my calcs are rite is a .157"...do i use .150"? need help and if anyone wants to part with what i need, ill paypal rite away. thanks guys
-
-
You need a 5mm x 4mm coupler. Steven may have one. If not I can make you one.
Might be better off using a 150 cable and 3/16" shaft. Then it would be normal. What stub shaft does it have a 3/16"? -
its funky. the cable and strut are two diff pieces and the end of the flex cable is square. i dont really like it but ill deal with for now. and the shaft isnt 3/16", its smaller cuz my octura x642 prop is loose on it so i have to run the stock prop for now.Comment
-
That's a typical chinese setup. I don't like them either. You have to remove the strut to pull the cable out to lube it. Best idea is like Jeff says, change it out for .150 cable and 3/16" shaft. Not sure what you will have to do to the strut to modify it. You may have to get a new strut. You might want to check with Steven at OSE to see if he has some sort of strut bushing that will modify it. I would be interested to know myself! I have some of those struts and shafts in my 'junk' drawer.Mini Cat Racing USA
www.minicatracingusa.comComment
-
steven never got back to me on this, he must be busy. is there anyway i can run my x642 prop on this shaft? i know the x642 is for 3/16" shaft size. The prop it comes with has a sleeve i might try to take out and see if it fits.Comment
Comment